Претраживање
Приказ резултата 1-10 од 12
Thermal shock of ceramic material : Damage resistance parameters and critical flaw size
(Trans Tech Publications Ltd., 1997)
The alumina refractories used in this study included a serias of 12 commertial products (two fireclay and ten high alumina brands ) containing ≈ 45 - 90 % Al2O3. Damage resistance parameters R,, R, and RSt were used in ...
Sintering behaviour of nanosized HAP powder
(Trans Tech Publications Ltd, Durnten-Zurich, 2007)
The influences of temperature and time on sintering behaviour of nanosized HAP powder were investigate in this paper. The calcium hydroxyapatite powder, with the average crystallite size of 34 +/- 1 nm, was uniaxially ...
Surface properties of HAP particles obtained by hydrothermal decomposition of urea and calcium-EDTA chelates
(Proceedings of the 15th International Symposium on Ceramics in Medicine; The Annual Meeting of the International Society for Ceramics in Medicine, 2003)
In this paper surface properties of calcium-hydroxyapatite, synthesized by modified hydrothermal reaction of urea and Ca(EDTA)(2-) in phosphate solutions, as well as the dependence of calcium hydroxyapatite dispersion ...
Thermal shock of ceramic material : Comparison of resistance parameter with the critical ΔT values ΔTc = ΔTc(Bi) of ceramic materials
(Trans Tech Publications Ltd., 1997)
Thermal shock resistance of ceramic material can be characterized by using resistance parameters or critical temperature difference. Correlation between fracture resistance parameter, R and critical temperature difference, ...
Graphic simulation of STM images of Si(111)7X7 surface
(Trans Tech Publications Ltd., 1997)
The posibilities of graphic STM image simulation at atomic level are indicated. The presented procedure takes into account various types of deformation on the surface near the Fermi level. A clean Si(111)7X7 surface is ...
Size distribution of ultrafine spherical ceramic powders obtained by ultrasonic spray pyrolysis
(Trans Tech Publications Ltd., 1997)
Comparative analysis of experimentally determined particle size distribution and theoretically calculated aerosole drop size distribution (obtained on the basis of 3D model of spherical / elliptical waves generated by the ...
Synthesis of spinel powders by the spray pyrolysis method
(Trans Tech Publications Ltd, Durnten-Zurich, 1997)
In this paper synthesis of spinel powders by the two-fluid spray pyrolysis method was performed. The influence of the precursors (AlCl3·9H2O and MgCl2·6H2O for S-1 powder and boehmite sol and MgCl2·6H2O for S-2 powder) on ...
Double-layer bioactive glass coatings obtained by pulsed laser deposition
(Trans Tech Publications Ltd, Durnten-Zurich, 2008)
Pulsed laser deposition was used to obtain functionally graded bioactive glass coatings on titanium substrates. An UV KrF* (lambda=248 nm, tau gt 7 ns) excimer laser was used for the multi-pulse irradiation of the targets. ...
Prediction of thermal shock behavior of alumina based refractories: Temperature difference, fracture resistance parameters and water quench
(Trans Tech Publications Ltd, Durnten-Zurich, 2001)
In this paper temperature difference and fracture resistance parameters were used for prediction of thermal shock behavior of the samples. Materials were alumina based commercial refractories with different content of Al2O3 ...
Influence of synthesis parameters on the particle sizes of nanostructured calcium-hydroxyapatite
(13th international Symposium on Ceramics in Medicine (BIOCERAMICS), 2001)
In this paper the synthesis of biocompatible calcium-hydroxyapatite particles, chemically and morphologically similar to the mineral particles in human bones, is presented. The influence of synthesis parameters: temperature, ...