Претраживање
Приказ резултата 1-10 од 31
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...
Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors
(Elsevier Sci Ltd, Oxford, 2008)
The morphology of perovskite LaNiO3 (LNO) thin films is a very important feature considering the fact that they could be used as an electrode material in ferroelectric devices. In this work, LNO films were prepared from ...
Sensitivity analysis of mathematical models for final product properties: Link to DTG curve
(Elsevier Sci Ltd, Oxford, 2013)
Compressive strength and water absorption of fired heavy clay products varies with firing temperatures, but not entirely according to linear function, as it is mostly reported in literature. Also, differential thermo-gravimetric ...
Synthesis and characterization of Cr3+ doped TiO2 nanometric powders
(Elsevier, 2016)
Simple route was used for synthesis of nanostructured titania samples doped with 3 and 6 mol% of Cr3+ Titanium(IV)-isopropoxide and water were used as starting materials and as an agents for controlling hydrolysis and ...
Behavior of silicon carbide/cordierite composite material after cyclic thermal shock
(Elsevier Sci Ltd, Oxford, 2009)
In the present work Mg-exchanged zeolite and silicon carbide were used as starting materials for obtaining cordierite/SiC composite ceramics with weight ratio 30:70. Samples were exposed to the water quench test from 950 ...
Phase transformation in cordierite gel synthesized by non-hydrolytic sol-gel route
(Elsevier Sci Ltd, Oxford, 2007)
Cordierite gel was synthesized by non-hydrolytic sol-gel route, starting from aluminum chloride, TEOS and magnesium chloride dissolved in absolute ethanol. Crystallization of p.-cordierite from gel at temperatures between ...
Influence of microstructure and phase composition on the nanoindentation characterization of bioceramic materials based on hydroxyapatite
(Elsevier Sci Ltd, Oxford, 2009)
The aim of the study was to investigate the influence of microstructure and phase composition on the mechanical behaviour of hydroxyapatite (HAp) and biphasic HAp/beta-tricalcium phosphate (beta-TCP) bioceramic materials ...
Processing of dense nanostructured HAP ceramics by sintering and hot pressing
(Elsevier Sci Ltd, Oxford, 2009)
A nanosized HAP powder was sintered and hot pressed, in order to obtain dense HAP ceramics. In a first series of experiments, the powder was isostatically pressed into uniform green compacts and sintered at temperatures ...
Preparation of TiO2/carbon nanotubes photocatalysts: The influence of the method of oxidation of the carbon nanotubes on the photocatalytic activity of the nanocomposites
(Elsevier Sci Ltd, Oxford, 2012)
A method for the preparation of efficient TiO2/multi-wall carbon nanotubes nanocomposite photocatalysts by precipitation of anatase TiO2 nanoparticles onto differently oxidized carbon nanotubes is presented. The precursor ...
Thermal shock damage characterization of refractory composites
(Elsevier Sci Ltd, Oxford, 2008)
The possibility of using dolomite and bauxite for synthesis of high temperature castable was studied. Behavior of the material in conditions of rapid temperature changes was investigated. Water quench test was applied to ...