Search
Now showing items 1-10 of 164
The impact of wood fiber surface modification on physical properties of wood-polymer composites / Uticaj modifikacije površine vlakana drveta na mehanička svojstva kompozita polimer-drvo
(Savez inženjera i tehničara Srbije, Beograd, 2016)
In this paper, the impact of wood fiber surface modification on mechanical properties of poly-(methyl methacrylate)(PMMA)-wood composite was examined. FTIR analysis has shown that the wood fiber surface modification was ...
Tools for optimizing the operating conditions of waste-to-energy plant / Alati za optimizaciju radnih uslova postrojenja za energetsko iskorišćenje otpada
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
The efficient use of energy and resources is important from the point of environmental responsibility, but at the same time, it can be an opportunity towards obtaining economic value. Waste-to-energy (WtE) plants have the ...
Microvickers hardness determination of unsaturated polyester resins reinforced with alumina based reinforcement / Ispitivanje mikrotvrdoće nezasićenih poliestarskih smola sa ojačanjima na bazi aluminijum oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Commercial alumina wiskers (Al2O3 w) and synthesized alumina particles via sol-gel technique (Al2O3 m) were used as reinforcement in unsaturated polyester resins (UPR). Composite materials with the addition of 0.1 wt. %, ...
Cadmium in pheasant tissues as a bioindicator of environmental pollution in 23 Serbian districts
(Institute of meat hygiene and technology, 2016)
Concentrations of cadmium (Cd) were measured in leg muscle and liver of pheasants (n=316) from 23 different Serbian regions under the Serbian National Residue Monitoring Program during 2013-2015. Levels of Cd in pheasant ...
Application of alumosilicate polymers based on metakaolin in adsorption of cadmium ions from wastewater / Primena alumosilikatnih polimera na bazi metakaolina u adsorpciji jona kadmijuma iz otpadnih voda
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Alumosilicate polymers (geopolymers) based on metakaolin as precursor and alkaline activators of different concentrations (2M, 4M, 6M and 8M NaOH/Na2SiO3) were used to remove ions of cadmium from wastewater. Experiments ...
Sorption of textile dyes from textile wastewater by chitosan-based hydrogel / Sorpcija boja za tekstil iz tekstilnih otpadnih voda pomoću hidrogela na bazi hitozana
(Savez inženjera i tehničara Srbije, Beograd, 2018)
With the excessive risks that are present in today's environment, it is of great importance to treat wastewaters before their discharge in water streams. One of the everyday challenges is design of a low-cost and environmentally ...
Mechanical and structural properties of friction stir weld of dissimilar aluminum alloys / Mehahička i strukturna svojstva spojeva od raznorodnih aluminijumskih legura zavarenih FSW postupkom
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2017)
In this work, the structural and mechanical properties of friction stir welded dissimilar butt joints of AA2024-T351 to AA5083-H112 aluminum alloys were evaluated. Plates of 6 mm thick were friction stir welded with optimized ...
Preliminary analysis of the possibility of preparing PVB/IF-WS2 composites. Effect of nanoparticles addition on thermal and rheological behavior of PVB / Predvaritel'nyj analiz vozmožnosti podgotovki kompozitov PVB / IF- WS2 i ëffekty vlijanija dobavki nanočastic na termičeskoe i reologičeskoe povedenija PVB / (francuski) Analyse préliminaire de la possibilité de préparation des composites PVB/IF-WS2 et effet de l'addition des nano particules sur le comportement thermique et rhéologique de PVB
(Military Technical Institute, Belgrade, 2016)
A possibility of using inorganic fullerene-like tungsten disulfide, IF-WS2, nanoparticles as a filler in poly (vinyl butyral), PVB, for improving its thermal and rheological properties is examined. PVB is a thermoplastic ...
Two-stage fermentation for lactic acid production on distillery stillage / Dvostepena fermentacija za proizvodnju mlečne kiseline na destilerijskoj džibri
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2018)
The aim of this study was to assess utilization of distillery stillage in a two-stage fermentation using Bacillus licheniformis TFUNS and Lactobacillus paracasei NRRL B-4564. In the first stage the stillage was pretreated ...
Impregnation of cellulose acetate films with carvacrol using supercritical carbon ioxide / Impregnacija filmova acetata celuloze karvakrolom pomoću natkritičnog ugljenik(IV)-oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Cellulose acetate films were impregnated with carvacrol using supercritical carbon dioxide. The supercritical impregnation process, conducted in a static regime at pressure of 21 MPa and temperature of 50°C, was optimized ...