Pretraživanje
Prikaz rezultata 11-20 od 164
Development of refractory coatings for application in the Lost Foam casting process / Razvoj vatrostalnih premaza za primenu u Lost foam procesu livenja
(Savez inženjera i tehničara Srbije, Beograd, 2011)
In this work, the results of examining the possibilities of use of a number of ceramic powders for manufacturing the coatings for polymeric models and their application in the Loast Foam casting process. According to it, ...
The influence of mechanical activation of ceramic powders on the quality of casting coatings / Uticaj mehaničke aktivacije keramičkih prahova na kvalitet livačkih premaza
(Savez inženjera i tehničara Srbije, Beograd, 2011)
In order to increase the efficiency of coatings, the influence of mechanical activation has been studied by monitoring the changes of surface and energy state, the change of structure and properties of ceramic powders under ...
Measures and methods for NOx reduction from glass-melting furnaces / Mere i metode za smanjenja emisije oksida azota iz peći za topljenje stakla
(Savez inženjera i tehničara Srbije, Beograd, 2011)
The nitrogen oxides emitted to atmosphere effect significantly on formation of photochemical smog, acidic rains and destroying of ozone shell of the earth. Therefore, the regulations for limited emission of nitrogen oxides ...
The analysis of forming PVB-SiO2 nanocomposite fibers by the electrospinning process / Analiza formiranja PVB-SiO2 nanokompozitnih vlakana pomoću elektrospining procesa
(Vojnotehnički institut, Beograd, 2011)
The poly (vinyl butyral)-silica (PVB-SiO2) nanofibers were obtained by the electrospinning process. The experiments were carried out with PVB solution in concentration of 10 wt.% where ethanol was used as the solvent. The ...
Tribological aspect of selecting filler metal for repair surfacing of gears by hardfacing / Tribološki aspekti izbora dodatnog materijala kod površinske reparacije zupčanika tvrdim navarivanjem
(Society for Structural Integrity and Life, Institute for Material Testing, 2011)
Analysis of repaired gears made of case-hardening steel 20MnCr5 by hardfacing method is presented in this paper. Hardfacing repaired gears are tested on the closed power circuit device with variation of the torque value. ...
Failure analysis of chain bracket / Analiza loma spojnice lanca
(Society for Structural Integrity and Life, Institute for Material Testing, 2011)
In spite of numerous and expensive research in the field of fatigue and fracture and regular control of end products, cracks occur every day in all fields of human activity. This paper describes failure analysis of chain ...
Determination of fatigue crack growth parameters in welded joint of HSLA steel / Određivanje parametara zamornog rasta prsline kod zavarenih spojeva od HSLA čelika
(Society for Structural Integrity and Life, Institute for Material Testing, 2011)
The structural integrity and operational safety of welded pressure vessels primarily depends on the behaviour of weldments. In spite of all efforts in material production and improvements in welding techniques, including ...
Techno-economic optimization of energy supply of a livestock farm / Tehno-ekonomska optimizacija snabdevanja energijom farmi stoke
(Univerzitet u Nišu, Niš, 2015)
Livestock farming is a significant part of agricultural market in Serbia. However, a descending trend of livestock species has been recorded recently, despite its potential for meat export. Application of new technologies ...
Micromechanical properties of composite systems consisting of electrodeposited nickel coatings on different substrates / Mikromehanička svojstva kompozitnih sistema formiranih elektrohemijskim taloženjem filmova nikla i bakra na različitim podlogama
(Savez inženjera i tehničara Srbije, Beograd, 2012)
Fine-grained nickel and copper thin films were electrodeposited (ED) from self-made sulphamate and sulphate electrolytes, respectively, on different substrates. The substrates were single crystal silicon with two different ...
Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution
(Association of Metallurgical Engineers of Serbia, 2013)
In this study six samples of polyurethane/p-aramid multiaxial fabric forms (Colon fabrics) were coated with 10 wt.% poly (vinyl butyral) (PVB)/ethanol solution with the addition of multiwalled carbon nanotubes (MWCNT). The ...