Претраживање
Приказ резултата 21-30 од 33
Influence of Alkyd Composite Coatings with Polyaniline Doped with Different Organic Acids on the Corrosion of Mild Steel
(MDPI, 2023)
Composite coatings prepared by mixing 5 wt.% polyaniline with commercial alkyd-based paints were applied on carbon steel. The polyaniline emeraldine chloride salt was prepared by procedure recommended by IUPAC, including ...
Application of the Composite Hardness Models in the Analysis of Mechanical Characteristics of Electrolytically Deposited Copper Coatings: The Effect of the Type of Substrate
(Metals, 2021)
The mechanical characteristics of electrochemically deposited copper coatings have been examined by application of two hardness composite models: the Chicot-Lesage (C-L) and the Cheng-Gao (C-G) models. The 10, 20, 40 and ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...
Fast Gold Recovery from Aqueous Solutions and Assessment of Antimicrobial Activities of Novel Gold Composite
(MDPI, 2023)
A novel porous gold polymer composite was prepared by the functionalization of a glycidyl methacrylate-based copolymer (pGME) with ethylene diamine (pGME-en), and activation by gold (pGME-en/Au), in a simple batch adsorption ...
The Extraction of Copper from Chalcopyrite Concentrate with Hydrogen Peroxide in Sulfuric Acid Solution
(MDPI, 2023)
Research on chalcopyrite leaching represents a great challenge, given its importance as one of the most abundant copper minerals and its significant role in global copper extraction. This study aimed to evaluate the effects ...
Advances in Thermochemical Synthesis and Characterization of the Prepared Copper/Alumina Nanocomposites
(MDPI, Basel, 2020)
This paper presents thermochemical synthesis of copper/alumina nanocomposites in a Cu-Al(2)O(3)system with 1-2.5 wt.% of alumina and their characterization, which included: transmission electron microscopy: focused ion ...
Microstructural and Cavitation Erosion Behavior of the CuAlNi Shape Memory Alloy
(Metals, 2021)
Microstructural and cavitation erosion testing was carried out on Cu-12.8Al-4.1Ni (wt. %) shape memory alloy (SMA) samples produced by continuous casting followed by heat treatment consisting of solution annealing at 885 ...
Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards
(MDPI, Basel, 2018)
This paper presents an experimentally-proved hydrometallurgical process for selective metals recovery from the waste-printed circuit boards (WPCBs) using a combination of conventional and time-saving methods: leaching, ...
Kinetics of Chalcopyrite Leaching by Hydrogen Peroxide in Sulfuric Acid
(MDPI, Basel, 2019)
In ores, chalcopyrite is usually associated with other sulfide minerals, such as sphalerite, galena, and pyrite, in a dispersed form, with complex mineralogical structures. Concentrates obtained by flotation of such ores ...
Selenate adsorption from water using the hydrous iron oxide-impregnated hybrid polymer
(MDPI, Basel, 2020)
Hybrid adsorbent, based on the cross-linked copolymer impregnated with hydrous iron oxide, was applied for the first time for Se(VI) adsorption from water. The influence of the initial solution pH, selenate concentration ...