Претраживање
Приказ резултата 11-20 од 896
Nanomechanical properties evaluation of bioactive glass coatings on titanium alloy substrate
(Natl Inst Optoelectronics, Bucharest-Magurele, 2006)
Bioinert metallic implants such as titanium and titanium alloys could be coated with bioactive materials with good adhesion to metal and which could be also bonded to the bone. In order to predict the mechanical behavior ...
Effect of annealing temperature on the formability of Al-Mg4.5-Cu0.5 alloy sheets
(Elsevier Science Sa, Lausanne, 2006)
Formability of Al-Mg4.5-Cu0.5 alloy sheets was tested after annealing at different temperatures (220-520 degrees C) and water quenching. The formability (normalized limiting dome heights, LDH/R) showed only a small variation ...
Thermal shock damage characterization of high temperature ceramics by non destructive test methods
(University of Chemistry and Technology, Prague, 2008)
In the present work a mixture of commercially available spinel, quartz (SiO2) and alumina (Al2O3) corresponding to cordierite stoichiometry was used as starting material for obtaining cordierite/SiC composite ceramics with ...
Prediction for debonding damage process of glass beads-reinforced modified polyphenylene oxide under simple shear
(Elsevier Science Sa, Lausanne, 2005)
A three-dimensional finite element cell modeling technique has been applied to predict the particle-matrix debonding process of particulate polymer composite (PPC) subject to simple shear loading. The particle-matrix ...
Corrosion protection of aluminium by a cataphoretic epoxy coating
(Elsevier Science Sa, Lausanne, 1999)
The corrosion behavior and thermal stability of epoxy coating electrodeposited on aluminium have been investigated during exposure to 3% NaCl. Electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption ...
Experimental determination and modelling of densities and excess molar volumes of ternary system (1-butanol + cyclohexylamine plus n-heptane) and corresponding binaries from 288.15 to 323.15 K
(Elsevier Science Bv, Amsterdam, 2009)
Experimental densities rho and excess molar volumes V-E of one ternary and three binary systems containing 1-butanol, cyclohexylamine and n-heptane at temperatures from 283.15 to 323.15 K are reported. Density measurements ...
Evaluation of the potential of periodically operated reactors based on the second order frequency response function
(Inst Chemical Engineers, Rugby, 2008)
A new, fast and easy method for analysing the potential for improving reactor performance by replacing steady state by forced periodic operation is presented. The method is based on Volterra series, generalized Fourier ...
Myeloperoxidase-mediated oxidation of organophosphorus pesticides as a pre-step in their determination by AChE based bioanalytical methods
(Springer Wien, Wien, 2010)
In order to improve the sensitivity of assays for inhibitors of the enzyme acetylcholine esterase (AChE), an effective method was developed for the conversion of the organophosphate pesticides (OPs) diazinon, malathion, ...
Effect of low-temperature plasma and chitosan treatment on wool dyeing with acid red 27
(John Wiley & Sons Inc, Hoboken, 2005)
This study examines in detail the influence of low-temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink-resistance measurements. ...
Electrophoretic Deposition of Biocomposite Lignin/Hydroxyapatite Coatings on Titanium
(Walter de Gruyter Gmbh, Berlin, 2009)
In this work, electrophoretic deposition (EPD) was applied to obtain novel hydroxyapatite (HAP)/lignin (Lig) biocomposite coatings on titanium substrate. Nanosized hydroxyapatite powder, prepared by using the modified ...