Pretraživanje
Prikaz rezultata 21-30 od 3118
Effects of plastic deformation on the properties of W-Ni-Fe heavy alloys
(International Institute for the Science of Sintering, Beograd, 2001)
The effects of reduction in area due to rotary forging on the structure, physical and mechanical properties of 92,5W-5Ni-2,5Fe heavy alloy rods have been presented in this paper. Sintered rods (20mm) were rotary forged ...
On the serrated yielding in AlMg6.5 alloy sheet
(Serbian Chemical Society, Belgrade, 1998)
Room temperature tensile tests were performed on AlMg6.5 alloy sheet, with Initial strain rates of 6.7x10(4) s(1), 6.7x10(-3) s(-1) and 6.7x10(-2) s(-1), after imposing 70% cold rolling reductions, and annealing at 320 ...
Image analysis of protective layer of zinc on steel obtained using the hot process / Analiza slike za karakterisanje zaštitnog sloja cinka na čeliku dobijenog toplim cinkovanjem
(Savez inženjera metalurgije Srbije, Beograd, 2003)
The procedure for measuring the thickness of anticorrosion protective layer of zinc on steel is given. The metallographic images are used for this measurement. Results are statistically handled and results are used to ...
The morphology of cavitation damage of heat-treated medium carbon steel / Morfologija kavitacionog oštećenja srednje-ugljeničnog čelika u poboljšanom stanju
(Serbian Chemical Society, Belgrade, 2006)
In this paper the morphology of the cavitation damage to heat-treated medium carbon steel was analyzed. The experiments were conducted using a modified vibratory cavitation test set up. The erosion rates were measured by ...
The usage of optical fibers for damage detection in ballistic protection composite laminates / Upotreba optičkih vlakana za detekciju oštećenja kompozitnih laminata namenjenih za balističku zaštitu
(Association of Chemical Engineers of Serbia, 2006)
This paper describes the procedure of embedding fiber optic sensors in laminar thermoplastic composite material, as well as damage investigation after ballistic loading. Thermoplastic-reinforced composite materials were ...
Initiation of MMA polymerization by iniferters based on dithiocarbamates / Iniciranje polimerizacije metilmetakrilata iniferterima na bazi ditiokarbamata
(Association of Chemical Engineers of Serbia, 2005)
Twelve modified dithiocarbamates and a thiuramdisulfide used for the initiation of methyl methacrylate (MMA) polymerization were synthesized in this study. The polymerization of MMA was followed by determine the yield and ...
Characterisation of natural isolates of lactic acid bacteria from white soft cheese from Sjenica / Karakterizacija prirodnih izolata bakterija mlečne kiseline iz Sjeničkog sira
(Faculty of Technology, Novi Sad, 2000)
Selection of natural isolates of lactic acid bacteria (LAB) according to criteria that are significant for cheese manufacture and their application as starter cultures, contributed to unifying quality and better control ...
Epoxy coatings electrodeposited on steel electrochemically modified by Zn-Co alloys / Epoksidne kataforetske prevlake na čeliku modifikovanom Zn-Co legurama
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The corrosion behavior of epoxy coatings electrodeposited on steel and steel modified by Zn-Co alloys deposited from chloride and sulphate baths were investigated during exposure to 3 % NaCl. The electrochemical impedance ...
The influence of the solidification rate on the interface shape and distribution of solute
(Savez inženjera metalurgije Srbije, Beograd, 2002)
In this paper investigation of the influence of the solidification conditions on the interface shape and distribution of solute during the solidification of AI-Cu alloy by vertical Bridgman method were investigated. The ...
On the Al-Mg alloy sheets for automotive application: Problems and solutions
(Savez inženjera metalurgije Srbije, Beograd, 2004)
Aluminium alloys suitable for automotive application were reviewed briefly as well as the reasons for the future wider application of Al-Mg type alloys. Basic problems related to the limited consumption of Al-Mg type alloy ...