Search
Now showing items 41-50 of 62
The study of Zn-Co alloy coatings electrochemically deposited by pulse current / Ispitivanje prevlaka Zn-Co legura dobijenih pulsirajućom strujom
(Association of Chemical Engineers of Serbia, 2012)
The electrochemical deposition by pulse current of Zn-Co alloy coatings on steel was examined, with the aim to find out whether pulse plating could produce alloys that could offer a better corrosion protection. The influence ...
Microindentation hardness testing of different composite systems with thin electrodeposited nickel and copper films
(Belgrade : Military Technical Institute, 2012)
Thin Ni and Cu films with fine-grained structures have been electrodeposited from self-made sulphamate-based and sulphate-based electrolytes, respectively. DC electrodeposition of Ni films was performed on single crystal ...
Structural, Mechanical and Electrical Characteristics of Copper Coatings Obtained by Various Electrodeposition Processes
(Electronics, 2022)
Mechanical (hardness and adhesion) and electrical (sheet resistance) characteristics of electrolytically produced copper coatings have been investigated. Morphologies of Cu coatings produced galvanostatically at two current ...
The importance of using hydrogen evolution inhibitor during the Zn and Zn-Mn electrodeposition from ethaline
(Srpsko hemijsko društvo, Beograd, 2019)
Cyclic voltammetry was used for the characterization of zinc electro-deposition on steel from ethaline deep eutectic solution (1:2 choline chloride:ethylene glycol). The influence of 4-hydroxy-benzaldehyde (HBA) as an ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolytehas been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes of ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, Basel, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15-70 mAcm(-2), obtained by varying either the frequency (30, ...
Electrochemically deposited Ni+WC composite coatings obtained under constant and pulsating current regimes
(Netherlands : Kluwer Academic Publishers, 2004)
A series of Ni+WC composite coatings were obtained by electrodeposition on a rotating disc electrode (RDE)from a commercially available Watts bath containing additives for brightness and smoothing and insoluble WCparticles, ...
Comparative analysis of the polarization and morphological characteristics of electrochemically produced powder forms of the intermediate metals
(Macedonian Journal of Chemistry and Chemical Engineering, 2014)
The polarization and morphological characteristics of powder forms of the group of the intermediate metals were examined by the analysis of silver and copper electrodeposition processes at high overpotentials. The pine-like ...
Zn-Co-CeO2 vs. Zn-Co Coatings: Effect of CeO2 Sol in the Enhancement of the Corrosion Performance of Electrodeposited Composite Coatings
(Metals, 2021)
Electrodeposition and characterization of novel ceria-doped Zn-Co composite coatings was the main goal of this research. Electrodeposited composite coatings were compared to pure Zn-Co coatings obtained under the same ...
INFLUENCE OF ELECTRODEPOSITION REGIME AND Sn:Pd RATIOS IN Sn-Pd ELECTROCATALYSTS ON ETHANOL OXIDATION REACTION / ВЛИЈАНИЕ НА РЕЖИМОТ НА ЕЛЕКТРОДЕПОЗИЦИЈАТА И НА ОДНОСИТЕ НА Sn:Pd ВО Sn-Pd-ЕЛЕКТРОКАТАЛИЗАТОРИТЕ ВРЗ ОКСИДАЦИЈАТА НА ЕТАНОЛОТ
(Society of Chemists and Technologists of Macedonia, 2023)
A series of bimetallic Sn-Pd catalysts were prepared by a template-free two step electrodeposition method. According to this method, Sn was electrodeposited firstly in potentiostatic or galvanostatic regime on Cu electrodes ...