Претраживање
Приказ резултата 11-20 од 2959
Nanomechanical properties evaluation of bioactive glass coatings on titanium alloy substrate
(Natl Inst Optoelectronics, Bucharest-Magurele, 2006)
Bioinert metallic implants such as titanium and titanium alloys could be coated with bioactive materials with good adhesion to metal and which could be also bonded to the bone. In order to predict the mechanical behavior ...
Synthesis of N-substituted 4,6-dimethyl-3-cyano-2-pyridones under microwave irradiation
(Taylor & Francis Inc, Philadelphia, 2006)
N-substituted 4,6-dimethyl-3-cyano-2-pyridones have been prepared from acetylacetone, N-substituted cyanoacetamide, and pyperidine as catalyst under microwave irradiation without solvent. The rapid and simple method produced ...
Electrophoretic Deposition of Biocomposite Lignin/Hydroxyapatite Coatings on Titanium
(Walter de Gruyter Gmbh, Berlin, 2009)
In this work, electrophoretic deposition (EPD) was applied to obtain novel hydroxyapatite (HAP)/lignin (Lig) biocomposite coatings on titanium substrate. Nanosized hydroxyapatite powder, prepared by using the modified ...
Swelling behaviour and paracetamol release from poly(N-isopropylacrylamide-itaconic acid) hydrogels
(Springer, New York, 2009)
Copolymer hydrogels of N-isopropylacrylamide and itaconic acid (IA), crosslinked with N,N'-methylenebisacrylamide, were prepared by radical copolymerization. These hydrogels were investigated with regard to their composition ...
Synthesis and characterization of biodegradable poly(butylene succinate-co-butylene fumarate)s
(Pergamon-Elsevier Science Ltd, Oxford, 2003)
A series of aliphatic biodegradable polyesters modified with fumaric residues was synthesized by transesterification in the melt of dimethyl succinate, dimethyl fumarate and 1,4-butanediol. The amount of unsaturation, ...
Characterization of microstructural changes in an Al-6.8 wt.% Mg alloy by electrical resistivity measurements
(Elsevier Science Sa, Lausanne, 2008)
Microstructural changes in an AlMg6.8 alloy after different thermo mechanical (TMT) and sensitization treatments were investigated by electrical resistivity measurements. The electrical resistivity was most affected by the ...
From Agricultural Waste to Biofuel: Enzymatic Potential of a Bacterial Isolate Streptomyces fulvissimus CKS7 for Bioethanol Production
(Springer, Dordrecht, 2021)
Purpose To avoid a negative environmental and economic impact of agricultural wastes, and following the principles of circular economy, the reuse of agricultural wastes is necessary. For this purpose, isolation of novel ...
Iron-Modified Sepiolite for Ni2+ Sorption from Aqueous Solution: An Equilibrium, Kinetic, and Thermodynamic Study
(Amer Chemical Soc, Washington, 2010)
Sepiolite was used for the synthesis of the sepiolite-iron oxide system to obtain a sorbent suitable for the removal of Ni2+ from aqueous solution. The modified material, Fe-sepiolite, was characterized by X-ray diffraction ...
Hydrogen evolution at Zn-Ni alloys
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
Zn-Ni alloys were electrodeposited from a berate-citrate and TEPA bath in potentiostatic and galvanostatic regimes. Potential of electrodeposition or current density were varied and chemical composition and phase structure ...
The thermal degradation of polymethacrylonitrile with different end groups
(Springer, Dordrecht, 1997)
Polymethacrylonitrile (PMAN) was prepared by bulk, solution and precipitation polymerization. The thermal stability of the polymer, which is affected by the structure of the chain end groups, was studied by non-isothermal ...