Претраживање
Приказ резултата 1-10 од 13
Mechanical features of copper coatings electrodeposited by the pulsating current (PC) regime on Si(111) substrate
(Electrochemical Science Group, Beograd, 2020)
Mechanical features of the Cu coatings produced by the pulsating current (PC) regime on Si(111) substrate have been investigated. The Cu coatings were electrodeposited by varying duty cycle (15-50 %) and keeping the current ...
Removal of metal cations from wastewater using recycled wool-based non-woven material / Uklanjanje katjona metala iz otpadne vode netkanim materijalom na bazi vune kao sekundarne sirovine
(Serbian Chemical Society, Belgrade, 2007)
In this study, the effect of low-temperature air plasma, biopolymer chitosan and hydrogen peroxide treatment of recycled wool-based non-woven material on metal cation uptake was investigated. Recycled wool-based material ...
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
Mechanical features of copper coatings electrodeposited by the pulsating current (PC) regime on Si(111) substrate
(International Journal of Electrochemical Science, 2020)
Mechanical features of the Cu coatings produced by the pulsating current (PC) regime on Si(111) substrate have been investigated. The Cu coatings were electrodeposited by varying duty cycle (15-50 %) and keeping the current ...
The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition / Jonska ravnoteža u sistemu CuSO4-H2SO4-H2O i formiranje strukture pčelinjeg saća elektrohemijskim taloženjem bakra
(Serbian Chemical Society, 2008)
The ionic equilibrium of the species in the CuSO4-H2SO4-H2O system was employed to systematize the conditions of copper electrodeposition leading to the formation of the honeycomb-like structure. The reason why CuSO4 ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel, copper and aluminum / Sinteza i koroziono ponašanje polianilina na mekom čeliku, bakru i aluminijumu iz benzoatnih rastvora
(Association of Chemical Engineers of Serbia, 2011)
The electrochemical synthesis of polyaniline (PANI) on mild steel, aluminum and copper from the sodium benzoate solutions has been investigated. It has been shown that thin, highly adherent, polyaniline films on the ...
Removal of copper(II) ion from aqueous solution by high-porosity activated carbon
(Water Research Commission, Pretoria, 2013)
The removal of copper(II) ion from aqueous solution by the granular activated carbon, obtained from hazelnut shells (ACHS) (Corylus avellana L. var. lunga istriana), was investigated. The ACHS was prepared from ground dried ...
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
The Application of a Natural Zeolite for Acid Mine Drainage Purification
(Japan Inst Metals & Materials, Sendai, 2015)
A natural zeolite from Serbia was employed for the removal of heavy metals from acid mine drainage (AMD) generated in the area of copper mine. The efficiency of the natural zeolite samples was tested on AMD that contained ...
Comparative analysis of the polarization and morphological characteristics of electrochemically produced powder forms of the intermediate metals
(Macedonian Journal of Chemistry and Chemical Engineering, 2014)
The polarization and morphological characteristics of powder forms of the group of the intermediate metals were examined by the analysis of silver and copper electrodeposition processes at high overpotentials. The pine-like ...