Претраживање
Приказ резултата 1-10 од 46
Analysis of the influence of structure on mechanical properties of multilayer Ni/Cu thin films for use in microelectronic technologies / Analiza uticaja strukture na mehanička svojstva višeslojnih tankih filmova Ni/Cu za primenu u mikroelektronskim tehnologijama
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Multilayer Ni/Cu thin films were produced by dual-bath electrodeposition technique (DBT) on polycrystalline cold-rolled Cu substrate. Different Ni/Cu multilayer structures were realized by changing of process parameters ...
Adsorption study of cadmium ions on kaolinite modified by histidine and cysteine / Adsorpcija kadmijumovih jona na kaolinitu modifikovanim histidinom i cisteinom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Continuous development of new technologies leads to increasing pollution of water, thus creating the need for new materials that could be used in the processes of its purification. Therefore, adsorbents prepared from ...
Examination of mechanical properties of acrilyc composite materials with different AL2O3 reinforcement by brazil test / Ispitivanje mehaničkih svojstava akrilatnih kompozitnih materijala sa različitim AL2O3 ojačanjima brazilskim testom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Composite materials based on UV-curing acrylates and various alumina-based reinforcements represent material that is suitable for the use in dentistry, but also in other areas. Composites were made using four different ...
Cavitation of refratory samples based on talc and domestic zeolite / Ispitivanje vatrostalnih uzoraka na bazi talka i domaćeg zeolita na dejstvo kavitacije
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Using domestic zeolite from Igroš as row material for ceramic samples for application in condition of cavitation erosion. Samples based on talc with 15 % of zeolite, from Igroš, sintered at 1200oC were used in this ...
Mehanička svojstva hibridnog kompozita UHMWPE/EVA ojačanog vlaknima dobijenim elektropredenjem / Mechanical properties of UHMWPE/EVA hybrid composite reinforced with fibers obtained by electrospinning
(Savez inženjera i tehničara Srbije, 2018)
Aluminijum oksidna (Al2O3) nanovlakna pripremljena su iz vodenog rastvora aluminijum hlorohidrata/poli(vinil alkohola) (PVA) korišćenjem tehnike elektropredenja. Maseni odnos aluminijum hlorohidrata/PVA bio je 5:1. Nakon ...
Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles / Poboljšana adhezija akrilnih adheziva sa zubnim tkivom uz dodatak čestica na bazi aluminijum oksida
(Savez inženjera i tehničara Srbije, Beograd, 2020)
Composite materials based on acrylate UV-cured polymers (Bis-GMA/TEGDMA) as a matrix and reinforcements that can be selected in order to adjust the properties of the obtained composite are used in the field of dental ...
Fluorescence analysis of liposomal membranes permeability / Fluorimetrijska analiza permeabilnosti lipozomalnih membrana
(Savez inženjera i tehničara Srbije, Beograd, 2019)
The present study provides insight into changes in the liposomal membrane fluidity as a result of variation of structural components (two types of standard phospholipids - 1,2-dipalmitoyl-sn-glycerero3-phosphocholine, i.e. ...
The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate / Uticaj oblika i veličine čestica AL2O3 na savojna svojstva PMMA kompozita modifikovanog dodatkom dimetil itakonata
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Dental materials have specific requirements regarding behavior in exploitation conditions. Poly (methyl methacrylate) (PMMA) is one of the most commonly used prosthetic materials. It is of interest to improve the mechanical ...
Microvickers hardness determination of unsaturated polyester resins reinforced with alumina based reinforcement / Ispitivanje mikrotvrdoće nezasićenih poliestarskih smola sa ojačanjima na bazi aluminijum oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Commercial alumina wiskers (Al2O3 w) and synthesized alumina particles via sol-gel technique (Al2O3 m) were used as reinforcement in unsaturated polyester resins (UPR). Composite materials with the addition of 0.1 wt. %, ...
Optimization of the process of calcium-carbonate dispersion stabilization for paper industry needs / Proces dobijanja stabilne disperzije kalcijum-karbonata za potrebe papirne industije
(Savez inženjera i tehničara Srbije, Beograd, 2018)
This paper presents the optimized technological process for obtaining stable calcium carbonate dispersion (CaCO3) in accordance to the standard prescribed in the paper industry. The reason for using CaCO3 in paper production ...