Претраживање
Приказ резултата 1-10 од 2436
Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants / Karakterizacija biokompatibilnih slojeva ZrO28%Y2O3 koji se koriste u kombinaciji sa drugom keramikom za modifikaciju površine implantata
(Inženjersko društvo za koroziju, 2021)
The aim of this study was to deposit multi-functional ZrO28%Y2O3 coating layers using the plasma spray technology and then to characterise such layers. In combination with other biomedical ceramics, this coating is intended ...
Synthesis of silver doped hydroxyapatite nanospheres using Ouzo effect
(Processing and Application of Ceramics, 2016)
Nanoemulsion technique, based on Ouzo effect, was applied for synthesis of the pure and silver doped (2.5 and 5 mol%) calcium hydroxyapatite (HAp). After calcination at 500 degrees C fully crystallized powders were obtained. ...
The influence of the woven construction on breaking load and relaxation / Uticaj konstrukcije tkanine na prekidnu silu i relaksaciju
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2008)
This article presents part of an extensive study of the deformity mechanism of weaves, which dealing with the influence of various parameters of fabric behavior under action of different mechanical loads. Investigation of ...
Numerical simulation of titanium alloy hip replacement implants behaviour under static and dynamic loads / Numerička simulacija implantata kuka od legure titanijuma pod statičkim i dinamičkim opterećenjima
(Savez hemijskih inženjera Srbije, 2023)
This paper presents development of numerical models for simulation of the behaviour of titanium alloy hip implants under static and dynamic loads, which is a part of extensive research involving the structural integrity ...
Numerical simulation of constraint effect on fracture initiation in welded specimens using a local damage model / Numerička simulacija uticaja veze na inicijaciju loma kod zavarenih epruveta upotrebom modela lokalnog oštećenja
(Society for Structural Integrity and Life, Institute for Material Testing, 2011)
In this paper, two micromechanical models: the Gurson-Tvergaard-Needleman (GTN) model and Complete Gurson Model (CGM) are used to predict ductile fracture initiation of two different welded specimens, SE(B) and C(T). The ...
Numerical analysis of thermal stresses in welded joint made of steels x20 and x22
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2014)
Stress calculation of steam pipeline is presented, focused on the welded joint. Numerical calculation was peiformed using the finite element method to obtain stress distribution in the welded joint made while replacing the ...
CFD analysis of exothermic reactions in al-au nano multi-layered foils
(Institute of Metals and Technology, 2011)
This work presents the possibility of numerical modelling using Computational Fluid Dynamics (CFD) in the field of nano-foils. The governing equations were solved using a Finite Volume Methodology (FVM). The computational ...
Some important characteristics of woven fabrics / Neke bitne karakteristike tkanina
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2004)
In this paper characteristics of woven fabrics that might be of importance from the aspect of fabrics usage value are described. These characteristics are: thickness, area density, fabric cover, porosity, elasticity ...
The influence of different supplements on the probiotic character of fermented whey-based beverage / Uticaj različitih dodataka na probiotski karakter fermentisanog napitka na bazi surutke
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2013)
The aim of this study was the selection of appropriate supplements for the probiotic whey-based beverage production by Lactobacillus johnsonii NRRL B-2178. The analysis of the main effects and their interactions was performed ...
Physical Properties of Sintered Alumina Doped with Different Oxides
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
Corundum (alpha-alumina) is a suiTab. material for usage in various industry fields owing to its chemical stability, electrical and mechanical features. It is known that properties of ceramics could be modified by addition ...