Quantitative evaluation of sulfur-polymer matrix composite quality
Само за регистроване кориснике
2013
Аутори
Vlahović, Milica M.Jovanić, Predrag
Martinović, Sanja
Boljanac, Tamara
Volkov-Husović, Tatjana
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In order to predict service life of the sulfur polymer composite, the samples were subjected to the induced destruction using 10% hydrochloric acid solution. Control specimens were prepared using Portland cement binder. Sulfur polymer composite showed limited mechanical strength and mass loss, while physico-mechanical properties of Portland cement composite regressed rapidly. The Image Pro Plus software was used for surface destruction monitoring. The simulations for composites were applied to the previously reported model for predicting the mechanical strength degradation during durability testing, based on the image analysis results. The results proved that the time gradient of structural change was useful for quantification of service life, therefore it can be accepted as a parameter that represents service life.
Кључне речи:
Polymer-matrix composites (PMCs) / Mechanical properties / Non-destructive testingИзвор:
Composites Part B-Engineering, 2013, 44, 1, 458-466Издавач:
- Elsevier Sci Ltd, Oxford
Финансирање / пројекти:
- Имплементација савременијих техничко-технолошких и еколошких решења у постојећим производним системима Рудника Бакра Бор и Рудника Бакра Мајданпек (RS-MESTD-Technological Development (TD or TR)-33007)
DOI: 10.1016/j.compositesb.2012.04.005
ISSN: 1359-8368
WoS: 000313854200054
Scopus: 2-s2.0-84867542505
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Vlahović, Milica M. AU - Jovanić, Predrag AU - Martinović, Sanja AU - Boljanac, Tamara AU - Volkov-Husović, Tatjana PY - 2013 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2494 AB - In order to predict service life of the sulfur polymer composite, the samples were subjected to the induced destruction using 10% hydrochloric acid solution. Control specimens were prepared using Portland cement binder. Sulfur polymer composite showed limited mechanical strength and mass loss, while physico-mechanical properties of Portland cement composite regressed rapidly. The Image Pro Plus software was used for surface destruction monitoring. The simulations for composites were applied to the previously reported model for predicting the mechanical strength degradation during durability testing, based on the image analysis results. The results proved that the time gradient of structural change was useful for quantification of service life, therefore it can be accepted as a parameter that represents service life. PB - Elsevier Sci Ltd, Oxford T2 - Composites Part B-Engineering T1 - Quantitative evaluation of sulfur-polymer matrix composite quality EP - 466 IS - 1 SP - 458 VL - 44 DO - 10.1016/j.compositesb.2012.04.005 ER -
@article{ author = "Vlahović, Milica M. and Jovanić, Predrag and Martinović, Sanja and Boljanac, Tamara and Volkov-Husović, Tatjana", year = "2013", abstract = "In order to predict service life of the sulfur polymer composite, the samples were subjected to the induced destruction using 10% hydrochloric acid solution. Control specimens were prepared using Portland cement binder. Sulfur polymer composite showed limited mechanical strength and mass loss, while physico-mechanical properties of Portland cement composite regressed rapidly. The Image Pro Plus software was used for surface destruction monitoring. The simulations for composites were applied to the previously reported model for predicting the mechanical strength degradation during durability testing, based on the image analysis results. The results proved that the time gradient of structural change was useful for quantification of service life, therefore it can be accepted as a parameter that represents service life.", publisher = "Elsevier Sci Ltd, Oxford", journal = "Composites Part B-Engineering", title = "Quantitative evaluation of sulfur-polymer matrix composite quality", pages = "466-458", number = "1", volume = "44", doi = "10.1016/j.compositesb.2012.04.005" }
Vlahović, M. M., Jovanić, P., Martinović, S., Boljanac, T.,& Volkov-Husović, T.. (2013). Quantitative evaluation of sulfur-polymer matrix composite quality. in Composites Part B-Engineering Elsevier Sci Ltd, Oxford., 44(1), 458-466. https://doi.org/10.1016/j.compositesb.2012.04.005
Vlahović MM, Jovanić P, Martinović S, Boljanac T, Volkov-Husović T. Quantitative evaluation of sulfur-polymer matrix composite quality. in Composites Part B-Engineering. 2013;44(1):458-466. doi:10.1016/j.compositesb.2012.04.005 .
Vlahović, Milica M., Jovanić, Predrag, Martinović, Sanja, Boljanac, Tamara, Volkov-Husović, Tatjana, "Quantitative evaluation of sulfur-polymer matrix composite quality" in Composites Part B-Engineering, 44, no. 1 (2013):458-466, https://doi.org/10.1016/j.compositesb.2012.04.005 . .