Influence of clay organic modifier on the morphology and performance of poly(epsilon-caprolactone)/clay nanocomposites
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Two series of poly(epsilon-caprolactone) poly(oxepan-2-one) nanocomposites with different organo-modified clays (1 to 8 wt. %) were prepared by the solution casting method. Organoclays with polar (Cloisite (R) C30B) and nonpolar (Cloisite (R) C 15A) organic modifiers and with different miscibility with the poly(epsilon-caprolactone) matrix were chosen. Exfoliated and/or intercalated structures of the nanocomposite were obtained using high dilution and ultrasonic treatment for the preparation of the composite. The effects of the surface modification and clay content on the morphology, and mechanical and thermal properties of the nanocomposites were studied. Scanning electron microscopy excluded the formation of microcomposites. The wide-angle X-ray diffraction analysis revealed that the tendency toward exfoliated structures was higher with Cloisite (R) C30B, which had better miscibility with poly(epsilon-caprolactone) matrix, than with Cloisite (R) Cl 5A. Differences in the sizes of the... spherulites and morphology between two series of the nanocomposites were observed by optical microscopy performed on as-cast films. The enthalpies of fusion and degrees of crystallinity were higher for the nanocomposites than for the neat poly(epsilon-caprolactone) and increased with clay loading in both series, because of the nucleating effect of the clay. The decreased thermal stability of the nanocomposites was ascribed to the thermal instability of the organic modifiers of the clays. The Halpin-Tsai model was used to compare the theoretically predicted values of the Young's modulus with the ones experimentally obtained in tensile tests.
Ključne reči:
biodegradable / aliphatic polyester / layered silicate / solution castingIzvor:
Journal of the Serbian Chemical Society, 2015, 80, 4, 529-547Izdavač:
- Srpsko hemijsko društvo, Beograd
Finansiranje / projekti:
- Sinteza i karakterizacija novih funkcionalnih polimera i polimernih nanokompozita (RS-MESTD-Basic Research (BR or ON)-172062)
DOI: 10.2298/JSC140924119N
ISSN: 0352-5139
WoS: 000354829100009
Scopus: 2-s2.0-84934876360
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Nikolić, Marija AU - Đorđević, Nataša AU - Rogan, Jelena AU - Đonlagić, Jasna PY - 2015 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2988 AB - Two series of poly(epsilon-caprolactone) poly(oxepan-2-one) nanocomposites with different organo-modified clays (1 to 8 wt. %) were prepared by the solution casting method. Organoclays with polar (Cloisite (R) C30B) and nonpolar (Cloisite (R) C 15A) organic modifiers and with different miscibility with the poly(epsilon-caprolactone) matrix were chosen. Exfoliated and/or intercalated structures of the nanocomposite were obtained using high dilution and ultrasonic treatment for the preparation of the composite. The effects of the surface modification and clay content on the morphology, and mechanical and thermal properties of the nanocomposites were studied. Scanning electron microscopy excluded the formation of microcomposites. The wide-angle X-ray diffraction analysis revealed that the tendency toward exfoliated structures was higher with Cloisite (R) C30B, which had better miscibility with poly(epsilon-caprolactone) matrix, than with Cloisite (R) Cl 5A. Differences in the sizes of the spherulites and morphology between two series of the nanocomposites were observed by optical microscopy performed on as-cast films. The enthalpies of fusion and degrees of crystallinity were higher for the nanocomposites than for the neat poly(epsilon-caprolactone) and increased with clay loading in both series, because of the nucleating effect of the clay. The decreased thermal stability of the nanocomposites was ascribed to the thermal instability of the organic modifiers of the clays. The Halpin-Tsai model was used to compare the theoretically predicted values of the Young's modulus with the ones experimentally obtained in tensile tests. PB - Srpsko hemijsko društvo, Beograd T2 - Journal of the Serbian Chemical Society T1 - Influence of clay organic modifier on the morphology and performance of poly(epsilon-caprolactone)/clay nanocomposites EP - 547 IS - 4 SP - 529 VL - 80 DO - 10.2298/JSC140924119N ER -
@article{ author = "Nikolić, Marija and Đorđević, Nataša and Rogan, Jelena and Đonlagić, Jasna", year = "2015", abstract = "Two series of poly(epsilon-caprolactone) poly(oxepan-2-one) nanocomposites with different organo-modified clays (1 to 8 wt. %) were prepared by the solution casting method. Organoclays with polar (Cloisite (R) C30B) and nonpolar (Cloisite (R) C 15A) organic modifiers and with different miscibility with the poly(epsilon-caprolactone) matrix were chosen. Exfoliated and/or intercalated structures of the nanocomposite were obtained using high dilution and ultrasonic treatment for the preparation of the composite. The effects of the surface modification and clay content on the morphology, and mechanical and thermal properties of the nanocomposites were studied. Scanning electron microscopy excluded the formation of microcomposites. The wide-angle X-ray diffraction analysis revealed that the tendency toward exfoliated structures was higher with Cloisite (R) C30B, which had better miscibility with poly(epsilon-caprolactone) matrix, than with Cloisite (R) Cl 5A. Differences in the sizes of the spherulites and morphology between two series of the nanocomposites were observed by optical microscopy performed on as-cast films. The enthalpies of fusion and degrees of crystallinity were higher for the nanocomposites than for the neat poly(epsilon-caprolactone) and increased with clay loading in both series, because of the nucleating effect of the clay. The decreased thermal stability of the nanocomposites was ascribed to the thermal instability of the organic modifiers of the clays. The Halpin-Tsai model was used to compare the theoretically predicted values of the Young's modulus with the ones experimentally obtained in tensile tests.", publisher = "Srpsko hemijsko društvo, Beograd", journal = "Journal of the Serbian Chemical Society", title = "Influence of clay organic modifier on the morphology and performance of poly(epsilon-caprolactone)/clay nanocomposites", pages = "547-529", number = "4", volume = "80", doi = "10.2298/JSC140924119N" }
Nikolić, M., Đorđević, N., Rogan, J.,& Đonlagić, J.. (2015). Influence of clay organic modifier on the morphology and performance of poly(epsilon-caprolactone)/clay nanocomposites. in Journal of the Serbian Chemical Society Srpsko hemijsko društvo, Beograd., 80(4), 529-547. https://doi.org/10.2298/JSC140924119N
Nikolić M, Đorđević N, Rogan J, Đonlagić J. Influence of clay organic modifier on the morphology and performance of poly(epsilon-caprolactone)/clay nanocomposites. in Journal of the Serbian Chemical Society. 2015;80(4):529-547. doi:10.2298/JSC140924119N .
Nikolić, Marija, Đorđević, Nataša, Rogan, Jelena, Đonlagić, Jasna, "Influence of clay organic modifier on the morphology and performance of poly(epsilon-caprolactone)/clay nanocomposites" in Journal of the Serbian Chemical Society, 80, no. 4 (2015):529-547, https://doi.org/10.2298/JSC140924119N . .