Heat-Affected Zone as Critical Location in Pressure Equipment
Samo za registrovane korisnike
2017
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The majority of pressure equipment is made from joining by welding parts or sub-assemblies. Welded structure should be produced by spending minimum of cost, assuring in the same time required function and safety. By proper selection of welded joint and material, designer determines the properties of final product, and also possibility of its fabrication. The greatest attention during designing and fabrication of pressure equipment should be paid to the most vulnerable part of a welded joint, its heat-affected zone. In current paper, an approach in solving the problem of cylindrical vessel under internal pressure containing an axial crack is presented.
Ključne reči:
Heat-affected zone / Residual stresses / Surface crack / Elastic plastic fracture mechanicsIzvor:
Applied Mechanics, Behavior of Materials, and Engineering Systems, 2017, 139-155Izdavač:
- Springer-Verlag Berlin, Berlin
DOI: 10.1007/978-3-319-41468-3_11
ISSN: 2195-4356
WoS: 000392176700011
Scopus: 2-s2.0-85007470831
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Milović, Ljubica PY - 2017 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3692 AB - The majority of pressure equipment is made from joining by welding parts or sub-assemblies. Welded structure should be produced by spending minimum of cost, assuring in the same time required function and safety. By proper selection of welded joint and material, designer determines the properties of final product, and also possibility of its fabrication. The greatest attention during designing and fabrication of pressure equipment should be paid to the most vulnerable part of a welded joint, its heat-affected zone. In current paper, an approach in solving the problem of cylindrical vessel under internal pressure containing an axial crack is presented. PB - Springer-Verlag Berlin, Berlin T2 - Applied Mechanics, Behavior of Materials, and Engineering Systems T1 - Heat-Affected Zone as Critical Location in Pressure Equipment EP - 155 SP - 139 DO - 10.1007/978-3-319-41468-3_11 ER -
@article{ author = "Milović, Ljubica", year = "2017", abstract = "The majority of pressure equipment is made from joining by welding parts or sub-assemblies. Welded structure should be produced by spending minimum of cost, assuring in the same time required function and safety. By proper selection of welded joint and material, designer determines the properties of final product, and also possibility of its fabrication. The greatest attention during designing and fabrication of pressure equipment should be paid to the most vulnerable part of a welded joint, its heat-affected zone. In current paper, an approach in solving the problem of cylindrical vessel under internal pressure containing an axial crack is presented.", publisher = "Springer-Verlag Berlin, Berlin", journal = "Applied Mechanics, Behavior of Materials, and Engineering Systems", title = "Heat-Affected Zone as Critical Location in Pressure Equipment", pages = "155-139", doi = "10.1007/978-3-319-41468-3_11" }
Milović, L.. (2017). Heat-Affected Zone as Critical Location in Pressure Equipment. in Applied Mechanics, Behavior of Materials, and Engineering Systems Springer-Verlag Berlin, Berlin., 139-155. https://doi.org/10.1007/978-3-319-41468-3_11
Milović L. Heat-Affected Zone as Critical Location in Pressure Equipment. in Applied Mechanics, Behavior of Materials, and Engineering Systems. 2017;:139-155. doi:10.1007/978-3-319-41468-3_11 .
Milović, Ljubica, "Heat-Affected Zone as Critical Location in Pressure Equipment" in Applied Mechanics, Behavior of Materials, and Engineering Systems (2017):139-155, https://doi.org/10.1007/978-3-319-41468-3_11 . .