Surface cleaning of raw cotton fibers with atmospheric pressure air plasma
Само за регистроване кориснике
2018
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this work, a possibility to use atmospheric pressure plasma treatment to clean cotton fibers surface was investigated. Dielectric barrier discharge (DBD) operating in air was used as plasma source. After plasma treatment, cotton fibers were characterized using several surface techniques: SEM, XPS, ATR-FTIR and zeta potential measurement; also wettability was evaluated using capillary height measurement. Results of investigation showed that plasma treatment primarily affects cuticle and primary wall of cotton which provides cleaning of the fibers surface. This caused increase of polar groups accessibility and better wettability of cotton samples. An attempt has been made to locate influence of plasma treatment on different structural layers of cotton fibers using different surface techniques. In addition, surface charge was investigated through measuring streaming potential and a connection was established between zeta potential and plasma treatment time. Furthermore, it was shown th...at measuring of zeta potential could be used as an additional technique to track changes and elucidate mechanisms of plasma treatment influence on cotton fibers.
Кључне речи:
Cotton / Cellulose / DBD / Surface cleaning / Zeta potentialИзвор:
Cellulose, 2018, 25, 7, 4199-4209Издавач:
- Springer, Dordrecht
Финансирање / пројекти:
- Функционализација, карактеризација и примена целулозе и деривата целулозе (RS-172029)
- Дијагностика и оптимизација извора плазме значајних за примене (RS-171034)
DOI: 10.1007/s10570-018-1820-5
ISSN: 0969-0239
WoS: 000435385800037
Scopus: 2-s2.0-85046789300
Колекције
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Kramar, Ana AU - Obradović, Bratislav M. AU - Vesel, Alenka AU - Kuraica, Milorad M. AU - Kostić, Mirjana PY - 2018 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4019 AB - In this work, a possibility to use atmospheric pressure plasma treatment to clean cotton fibers surface was investigated. Dielectric barrier discharge (DBD) operating in air was used as plasma source. After plasma treatment, cotton fibers were characterized using several surface techniques: SEM, XPS, ATR-FTIR and zeta potential measurement; also wettability was evaluated using capillary height measurement. Results of investigation showed that plasma treatment primarily affects cuticle and primary wall of cotton which provides cleaning of the fibers surface. This caused increase of polar groups accessibility and better wettability of cotton samples. An attempt has been made to locate influence of plasma treatment on different structural layers of cotton fibers using different surface techniques. In addition, surface charge was investigated through measuring streaming potential and a connection was established between zeta potential and plasma treatment time. Furthermore, it was shown that measuring of zeta potential could be used as an additional technique to track changes and elucidate mechanisms of plasma treatment influence on cotton fibers. PB - Springer, Dordrecht T2 - Cellulose T1 - Surface cleaning of raw cotton fibers with atmospheric pressure air plasma EP - 4209 IS - 7 SP - 4199 VL - 25 DO - 10.1007/s10570-018-1820-5 ER -
@article{ author = "Kramar, Ana and Obradović, Bratislav M. and Vesel, Alenka and Kuraica, Milorad M. and Kostić, Mirjana", year = "2018", abstract = "In this work, a possibility to use atmospheric pressure plasma treatment to clean cotton fibers surface was investigated. Dielectric barrier discharge (DBD) operating in air was used as plasma source. After plasma treatment, cotton fibers were characterized using several surface techniques: SEM, XPS, ATR-FTIR and zeta potential measurement; also wettability was evaluated using capillary height measurement. Results of investigation showed that plasma treatment primarily affects cuticle and primary wall of cotton which provides cleaning of the fibers surface. This caused increase of polar groups accessibility and better wettability of cotton samples. An attempt has been made to locate influence of plasma treatment on different structural layers of cotton fibers using different surface techniques. In addition, surface charge was investigated through measuring streaming potential and a connection was established between zeta potential and plasma treatment time. Furthermore, it was shown that measuring of zeta potential could be used as an additional technique to track changes and elucidate mechanisms of plasma treatment influence on cotton fibers.", publisher = "Springer, Dordrecht", journal = "Cellulose", title = "Surface cleaning of raw cotton fibers with atmospheric pressure air plasma", pages = "4209-4199", number = "7", volume = "25", doi = "10.1007/s10570-018-1820-5" }
Kramar, A., Obradović, B. M., Vesel, A., Kuraica, M. M.,& Kostić, M.. (2018). Surface cleaning of raw cotton fibers with atmospheric pressure air plasma. in Cellulose Springer, Dordrecht., 25(7), 4199-4209. https://doi.org/10.1007/s10570-018-1820-5
Kramar A, Obradović BM, Vesel A, Kuraica MM, Kostić M. Surface cleaning of raw cotton fibers with atmospheric pressure air plasma. in Cellulose. 2018;25(7):4199-4209. doi:10.1007/s10570-018-1820-5 .
Kramar, Ana, Obradović, Bratislav M., Vesel, Alenka, Kuraica, Milorad M., Kostić, Mirjana, "Surface cleaning of raw cotton fibers with atmospheric pressure air plasma" in Cellulose, 25, no. 7 (2018):4199-4209, https://doi.org/10.1007/s10570-018-1820-5 . .