Pretraživanje
Prikaz rezultata 31-40 od 589
Biodegradable mulch films obtained from unique combinations of cellulose, polycaprolactone, keratin and calcium carbonate
(Belgrade : Materials Research Society of Serbia, 2023)
Biodegradable mulch films from cellulose (CELL), cellulose/polycaprolactone (CELL/PCL),
cellulose/polycaprolactone/keratin (CELL/PCL/KER) and cellulose/polycaprolactone/keratin/ground calcium carbonate (CELL/PCL/KER/GCC) ...
Obtaining and characterising Cu-infused antimicrobial films formed from regenerated cellulose-CaCO3 composite
(Belgrade : Materials Research Society of Serbia, 2022)
Cellulose and cellulose-CaCO3 dopes were prepared by ultrasound dispersion of CaCO3 (0, 0.26,
or 0.65 w/w%) and dissolution of cellulose (13 w/w%) in ionic liquid 1-ethyl-3-
methylimidazolium acetate at 90 °C. Thereafter, ...
The ExcellMater project for advancement of novel bioceramic and composite biomaterials for medical applications
(Consiglio Nazionale delle Ricerche Istituto di Struttura della Materia, 2022)
Biomaterials engineering is one of the strongest research areas at the Faculty of Technology and Metallurgy (FTM), University of Belgrade including development of novel biomaterials for orthopaedic and dental applications. ...
Effect of the alkali treatment on the structure, moisture sorption and volume electrical resistivity of woven jute fabrics / Uticaj alkalnog tretmana na strukturu, sorpciju vlage i zapreminsku električnu otpornost tkanina od jute
(Beograd : Serbian Chemical Society, 2019)
Woven jute fabric was treated with NaOH solution of different concentrations for 5 min to
obtain jute fabrics with gradually decreased content of hemicelluloses and increased
moisture sorption. With increasing the ...
Alkali Modified Waste Jute Fabrics as Efficient Adsorbents for Various Cations and Anthraquinone dye / Alkakno modifikovane tkanine od jute kao efikasni adsorbenti za različite katjone i antrahinonsku boju
(Beograd : Savez inženjera i tehničara Srbije, 2021)
In this paper, the effect of alkali modifications (using 1% NaOH for 30 min or 17.5% NaOH for 5 min) on the jute fabrics' adsorption efficiency for various cations (Cu2+, Zn2+, and Ni2+) and anthraquinone dye (C.I. Acid ...
Structural Characteristics and Adsorption Properties of Alkali Activated Blends Ashes/Metakaolin
(Skopje : Society of Chemists and Technologists of Macedonia, 2023)
The aim of this paper is to show the possibility of using waste materials, blends of (wood ash, fly ash, from thermal power plant, and metakaolin) for the production of alkali activated materials that can be used to purify ...
Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints
(Elsevier B.V., 2022)
This paper is devoted to the ductile-brittle transition behavior of high strength low alloyed structural steel NIOMOL 490K. This steel grade is designed for welded pressure vessels exposed to dynamic loads, operating at ...
Effect of liquid glass type on hygienic characteristics of coated electrodes for arc welding of tin bronze
(EDP Sciences, 2021)
The results of investigations of chemical composition and emission rates of the welding
fume, generated during welding using electrodes for copper alloys, are presented with the aim of
improvement of their sanitary and ...
Intergranular Corrosion Susceptibility of an AA5083 Al-Mg Alloy Processed by Accumulative Roll Bonding (ARB)
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2015)
Intergranular corrosion (IGC) susceptibility of an AA5083 Al-Mg alloy sheets,
highly deformed by accumulative roll-bonding (ARB), was investigated. It was
shown that ARB processed specimens were resistant to IGC as the ...
Deposition of the DLC Structures In The Low-pressure Oxy-acetylene Flat Flame
(Institut za Tehničke nauke SANU Beograd, Beograd, Srbija, 2012)
The morphology and phase composition of the diamond-like carbon (DLC) structures as a function of a deposition process parameters are investigated. The DLC was deposited in the low-pressure oxy-acetylene flat flame onto ...