Search
Now showing items 341-348 of 348
Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards
(MDPI, Basel, 2018)
This paper presents an experimentally-proved hydrometallurgical process for selective metals recovery from the waste-printed circuit boards (WPCBs) using a combination of conventional and time-saving methods: leaching, ...
The influence of different supplements on the probiotic character of fermented whey-based beverage / Uticaj različitih dodataka na probiotski karakter fermentisanog napitka na bazi surutke
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2013)
The aim of this study was the selection of appropriate supplements for the probiotic whey-based beverage production by Lactobacillus johnsonii NRRL B-2178. The analysis of the main effects and their interactions was performed ...
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
Influence of Chitosan Coating on Mechanical Stability of Biopolymer Carriers with Probiotic Starter Culture in Fermented Whey Beverages
(Hindawi Ltd, London, 2015)
The aim of this study was to improve the mechanical stability of biopolymer carriers and cell viability with addition of chitosan coating during fermentation process and product storage. Dairy starter culture (1% (w/v)) ...
Impact of carrier material on fermentative activity of encapsulated yoghurt culture in whey based substrate
(Savez hemijskih inženjera, Beograd, 2017)
The main objectives of this paper were to study the influence of the carrier material used for encapsulation and of bead size to fermentative activity and viability of the dairy starter culture Lactoferm ABY 6. Encapsulation ...
Mechanical properties and microstructure of molybdenum coating layers deposited vacuum plasma spray process / Mehanička svojstva i mikrostruktura slojeva prevlake molibdena deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
Molybdenum coatings due to their excellent wear resistant properties and sliding characteristics under dry friction conditions are often used in applications to resist friction and dry sliding. Since molybdenum metal is ...
Advantage of use of activated flux-cored wire instead of solid wire with the mag welding process from the mechanical properties aspect
(Croatian Metallurgical Soc, Zagreb, 2013)
The objective of this paper is the analysis and evaluation of the quality of the new flux-cored wire designed for the MAG welding process that was developed and produced using special laboratory equipment. Experimental ...
Analysis of mechanical and structural properties of micro alloyed steel welded joints depending on quality of cored wire
(University of Osijek, Tech Fac, Slavonski Brod, 2013)
The aim of this study was to master new quality cored wires made of steel strips and the cores filled with metal powders and low molecular hydrophobic compounds. For experimental research, the specimens were made of micro ...