Претраживање
Приказ резултата 21-30 од 512
Effect of Electrodeposition Current Density on the Microstructure and Magnetic Properties of Nickel-cobalt-molybdenum Alloy Powders
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
Nanostructured nickel-cobalt-molybdenum alloy powders were electrodeposited from an ammonium sulfate bath. The powders mostly consist of an amorphous phase and a very small amount of nanocrystals with an mean size of less ...
Current efficiency in the chlorate cell process
(Srpsko hemijsko društvo, Beograd, 2014)
A mathematical model has been set up for current efficiency in a chlorate cell acting as an ideal electrochemical tubular reactor with a linear increase in hypochlorite concentration from the entrance to the exit. Good ...
Estimation of evaporative losses during storage of crude oil and petroleum products / Kvantifikacija evaporativnih gubitaka nafte i naftnih derivata tokom skladištenja
(Association of Chemical Engineers of Serbia, 2013)
Storage of crude oil and petroleum products inevitably leads to evaporative losses. Those losses are important for the industrial plants mass balances, as well as for the environmental protection. In this paper, estimation ...
Corrosion of an archaeological find from the Roman period in Serbia / Korozija arheoloških eksponata iz rimskog perioda u Srbiji
(Inženjersko društvo za koroziju, Beograd, 2012)
The degree of preservation of iron artifacts depends on the type of underground environment and the type of corrosion products formed on their surface. This paper analyses the conditions of an archaeological find made of ...
The enzyme separation plant modelling, design and optimization
(International Journal of Mathematical Models and Methods in Applied Sciences, 2011)
A new approach for plant model building was illustrated. The use of flowsheeting in design, however, differs from its use in operations and this should be reflected in the development of the simulation procedure. In design, ...
The tribological performance of hardfaced/thermal sprayed coatings for increasing the wear resistance of ventilation mill working parts
(Univerzitet u Kragujevcu - Fakultet inženjerskih nauka, Kragujevac, 2015)
During the coal pulverizing, the working parts of the ventilation mill are being worn by the sand particles. For this reason, the working parts are usually protected with materials resistant to wear (hardfaced/thermal ...
Alkaline disinfection of urban wastewater and landfill leachate by wood fly ash
(Inst Medical Research & Occupational Health, Zagreb, 2014)
Wood fly ash is an industrial by-product of the combustion of different wood materials and is mostly disposed of as waste on landfills. In our preliminary experiments, wood ash exhibited antibacterial activity against urban ...
A study of the photocatalytic degradation of the textile dye CI Basic Yellow 28 in water using a P160 TiO2-based catalyst / Proučavanje fotokatalitičke degradacije tekstilne boje CI Basic Yellow 28 u vodi koristeći P160 katalizator na bazi TiO2
(Serbian Chemical Society, Belgrade, 2012)
The photocatalytic degradation of the synthetic textile dye CI Basic Yellow 28 (BY28) in water, using a recently synthesized P160 TiO2-based catalyst, under Osram ultra-vitalux® lamp (300 W) light, was studied. The effects ...
Measurement of Sleepers Vibrations and Determination of Their Dynamic Deflection and Train Velocity / Merenje vibracija pružnih pragova i određivanje njihovog dinamičkog ugiba i brzine vozova
(Elektrotehnički fakultet, Istočno Sarajevo, 2014)
Structural, spectral and thermal properties of 2-(2-pyridylamino)pyridinium trihydrogen pyromellitate / Структурна, спектрална и термичка својства 2-(2-пиридиламино)пиридиниjум-трихидрогенпиромелитата
(Srpsko hemijsko društvo, 2014)
The title compound, (Hdipya)(H(3)pyr), where Hdipya is protonated 2,2'-dipyridilamine and H(3)pyr is the monoanion of pyromellitic acid (H(4)pyr), was obtained from a reaction mixture containing Zn(II) ions, dipya, Na(4)pyr ...