Претраживање
Приказ резултата 61-67 од 67
Deposition of the DLC Structures In The Low-pressure Oxy-acetylene Flat Flame
(Institut za Tehničke nauke SANU Beograd, Beograd, Srbija, 2012)
The morphology and phase composition of the diamond-like carbon (DLC) structures as a function of a deposition process parameters are investigated. The DLC was deposited in the low-pressure oxy-acetylene flat flame onto ...
Corrosion of Welded Joints - Case Studies
(Društvo za unapređivanje zavarivanja u Srbij - DUZS. Beograd, Srbija, Divčibare, Srbija, 2012)
Interkristalna, naponska, galvanska, piting korozija i korozija u zazorima se često javljaju u zavarenim spojevima. Opisani su uslovi pri kojima dolazi do pojave navedenih oblika korozije. Posebno su razmatrani slučajevi ...
Using the numerical simulations and comparative diagnostic methods to optimize the product
(The Bulletin of the National R&D Institute for Welding and Material Testing - ISIM Timişoara, Romania, 2012)
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
Serbian Virtual Observatory 2010-2012 and its Connection with Virtual Atomic and Molecular Data Center (VAMDC)
(Serbian Astronomical SocietyAstronomical Observatory Belgrade, 2012)
In this lecture we will review the progress in the developments in Serbian
Virtual Observatory (SerVO) within 2010-2012 period, as well as its relation
with the European FP7 project: Virtual Atomic and Molecular Data ...
Serbian Virtual Observatory
(ACM Press, 2012)
The work on SerVO - Serbian virtual observatory (http://servo.aob.rs/) started in 2008, with aims: 1) To establish SerVO and join the EuroVO - European Virtual Observatory and IVOA - Inetrnational Virtual Observatory ...
A coupled thermo-mechanical model of friction stir welding
(Vinca Institute of Nuclear Sciences, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...