Preparation and Characterization of Novel Glycidyl Methacrylate/Clay Nanocomposites
Autori
Stefanović, Ivan S.Marković, Bojana M.
Nastasović, Aleksandra B.
Vuković, Zorica M.
Dapčević, Aleksandra
Pavlović, Vladimir B.
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The impact of the type and amounts of nanofiller on the features of the glycidyl methacrylate-co-ethylene glycol dimethacrylate (GMA-co-EGDMA)/organomodified montmorillonite (OMt) nanocomposites that were prepared by in situ radical suspension polymerization, was examined. Cloisite 30B and Cloisite 25A were used in this study as nanofillers, in amounts of 2 and 10 wt.%. The structure, morphology, thermal stability and porosity of the initial GMA-co-EGDMA copolymer and their nanocomposites were examined by ATR-FTIR analysis, wide angle X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscopy (TEM), thermogravimetric analysis (TG) and mercury porosimetry. It has been established that both clay nanofillers were successfully incorporated into the structure of the initial copolymer, simultaneously on their surface and also on cross-sectional area. Prepared samples with 2 wt.% have predominantly exfoliated, wh...ile samples with 10 wt.% have some tactoids-aggregates structure of the OMt layers. Thermogravimetric analysis revealed that after ~ 30 % of degradation, all nanocomposites become more thermal stable than the initial copolymer. The obtained results indicate that porosity parameters can be easily modified with the addition of clay nanofillers and thus prepared nanocomposites adjusted to specific purposes. © 2022 Authors. Published by association for ETRAN Society.
Ključne reči:
Clay nanofillers / GMA-co-EGDMA Nanocomposites / Morphology / Porous structure / Thermal propertiesIzvor:
Science of Sintering, 2022, 54, 2, 189-200Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200026 (Univerzitet u Beogradu, Institut za hemiju, tehnologiju i metalurgiju - IHTM) (RS-MESTD-inst-2020-200026)
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Stefanović, Ivan S. AU - Marković, Bojana M. AU - Nastasović, Aleksandra B. AU - Vuković, Zorica M. AU - Dapčević, Aleksandra AU - Pavlović, Vladimir B. PY - 2022 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5174 AB - The impact of the type and amounts of nanofiller on the features of the glycidyl methacrylate-co-ethylene glycol dimethacrylate (GMA-co-EGDMA)/organomodified montmorillonite (OMt) nanocomposites that were prepared by in situ radical suspension polymerization, was examined. Cloisite 30B and Cloisite 25A were used in this study as nanofillers, in amounts of 2 and 10 wt.%. The structure, morphology, thermal stability and porosity of the initial GMA-co-EGDMA copolymer and their nanocomposites were examined by ATR-FTIR analysis, wide angle X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscopy (TEM), thermogravimetric analysis (TG) and mercury porosimetry. It has been established that both clay nanofillers were successfully incorporated into the structure of the initial copolymer, simultaneously on their surface and also on cross-sectional area. Prepared samples with 2 wt.% have predominantly exfoliated, while samples with 10 wt.% have some tactoids-aggregates structure of the OMt layers. Thermogravimetric analysis revealed that after ~ 30 % of degradation, all nanocomposites become more thermal stable than the initial copolymer. The obtained results indicate that porosity parameters can be easily modified with the addition of clay nanofillers and thus prepared nanocomposites adjusted to specific purposes. © 2022 Authors. Published by association for ETRAN Society. T2 - Science of Sintering T2 - Science of Sintering T1 - Preparation and Characterization of Novel Glycidyl Methacrylate/Clay Nanocomposites EP - 200 IS - 2 SP - 189 VL - 54 DO - 10.2298/SOS2202189S ER -
@article{ author = "Stefanović, Ivan S. and Marković, Bojana M. and Nastasović, Aleksandra B. and Vuković, Zorica M. and Dapčević, Aleksandra and Pavlović, Vladimir B.", year = "2022", abstract = "The impact of the type and amounts of nanofiller on the features of the glycidyl methacrylate-co-ethylene glycol dimethacrylate (GMA-co-EGDMA)/organomodified montmorillonite (OMt) nanocomposites that were prepared by in situ radical suspension polymerization, was examined. Cloisite 30B and Cloisite 25A were used in this study as nanofillers, in amounts of 2 and 10 wt.%. The structure, morphology, thermal stability and porosity of the initial GMA-co-EGDMA copolymer and their nanocomposites were examined by ATR-FTIR analysis, wide angle X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscopy (TEM), thermogravimetric analysis (TG) and mercury porosimetry. It has been established that both clay nanofillers were successfully incorporated into the structure of the initial copolymer, simultaneously on their surface and also on cross-sectional area. Prepared samples with 2 wt.% have predominantly exfoliated, while samples with 10 wt.% have some tactoids-aggregates structure of the OMt layers. Thermogravimetric analysis revealed that after ~ 30 % of degradation, all nanocomposites become more thermal stable than the initial copolymer. The obtained results indicate that porosity parameters can be easily modified with the addition of clay nanofillers and thus prepared nanocomposites adjusted to specific purposes. © 2022 Authors. Published by association for ETRAN Society.", journal = "Science of Sintering, Science of Sintering", title = "Preparation and Characterization of Novel Glycidyl Methacrylate/Clay Nanocomposites", pages = "200-189", number = "2", volume = "54", doi = "10.2298/SOS2202189S" }
Stefanović, I. S., Marković, B. M., Nastasović, A. B., Vuković, Z. M., Dapčević, A.,& Pavlović, V. B.. (2022). Preparation and Characterization of Novel Glycidyl Methacrylate/Clay Nanocomposites. in Science of Sintering, 54(2), 189-200. https://doi.org/10.2298/SOS2202189S
Stefanović IS, Marković BM, Nastasović AB, Vuković ZM, Dapčević A, Pavlović VB. Preparation and Characterization of Novel Glycidyl Methacrylate/Clay Nanocomposites. in Science of Sintering. 2022;54(2):189-200. doi:10.2298/SOS2202189S .
Stefanović, Ivan S., Marković, Bojana M., Nastasović, Aleksandra B., Vuković, Zorica M., Dapčević, Aleksandra, Pavlović, Vladimir B., "Preparation and Characterization of Novel Glycidyl Methacrylate/Clay Nanocomposites" in Science of Sintering, 54, no. 2 (2022):189-200, https://doi.org/10.2298/SOS2202189S . .