Modification of the aluminum for making offset printing plates
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Aluminum as the base of offset printing plates should make good contact with wetting agents and the light sensitive layer and should be resistant to wear and cracking. In order to achieve this, the aluminum is roughened and eventually anodized. A thin, electrochemically deposited chromium layer is used as the non-printing element in bimetallic offset printing forms. Chromium shows excellent wettability and wear resistance. The possibility of chemical deposition of chromium on aluminum from an alkaline solution is examined in this paper. The presence of chromium was confirmed and measured by EDAX. A difference in the spectral reflection characteristic between chromium-treated and non-treated specimens was also detected. An influence of a chromium layer on an aluminum surface was examined by water drop spreading. Chromium-treated samples showed better wettability than non-treated samples, but they are less wettable than anodized samples.
Кључне речи:
Aluminum / Cementation / Chromium / RouhgeningИзвор:
Journal of the Serbian Chemical Society, 2000, 65, 12, 935-938Издавач:
- Serbian Chemical Society
DOI: 10.2298/jsc0012935z
ISSN: 0352-5139
WoS: 000166372700011
Scopus: 2-s2.0-0040782853
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Živković, Predrag M. AU - Jovanović, Slobodan AU - Popov, Konstantin I. AU - Ilić, Nenad PY - 2000 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5329 AB - Aluminum as the base of offset printing plates should make good contact with wetting agents and the light sensitive layer and should be resistant to wear and cracking. In order to achieve this, the aluminum is roughened and eventually anodized. A thin, electrochemically deposited chromium layer is used as the non-printing element in bimetallic offset printing forms. Chromium shows excellent wettability and wear resistance. The possibility of chemical deposition of chromium on aluminum from an alkaline solution is examined in this paper. The presence of chromium was confirmed and measured by EDAX. A difference in the spectral reflection characteristic between chromium-treated and non-treated specimens was also detected. An influence of a chromium layer on an aluminum surface was examined by water drop spreading. Chromium-treated samples showed better wettability than non-treated samples, but they are less wettable than anodized samples. PB - Serbian Chemical Society T2 - Journal of the Serbian Chemical Society T1 - Modification of the aluminum for making offset printing plates EP - 938 IS - 12 SP - 935 VL - 65 DO - 10.2298/jsc0012935z ER -
@article{ author = "Živković, Predrag M. and Jovanović, Slobodan and Popov, Konstantin I. and Ilić, Nenad", year = "2000", abstract = "Aluminum as the base of offset printing plates should make good contact with wetting agents and the light sensitive layer and should be resistant to wear and cracking. In order to achieve this, the aluminum is roughened and eventually anodized. A thin, electrochemically deposited chromium layer is used as the non-printing element in bimetallic offset printing forms. Chromium shows excellent wettability and wear resistance. The possibility of chemical deposition of chromium on aluminum from an alkaline solution is examined in this paper. The presence of chromium was confirmed and measured by EDAX. A difference in the spectral reflection characteristic between chromium-treated and non-treated specimens was also detected. An influence of a chromium layer on an aluminum surface was examined by water drop spreading. Chromium-treated samples showed better wettability than non-treated samples, but they are less wettable than anodized samples.", publisher = "Serbian Chemical Society", journal = "Journal of the Serbian Chemical Society", title = "Modification of the aluminum for making offset printing plates", pages = "938-935", number = "12", volume = "65", doi = "10.2298/jsc0012935z" }
Živković, P. M., Jovanović, S., Popov, K. I.,& Ilić, N.. (2000). Modification of the aluminum for making offset printing plates. in Journal of the Serbian Chemical Society Serbian Chemical Society., 65(12), 935-938. https://doi.org/10.2298/jsc0012935z
Živković PM, Jovanović S, Popov KI, Ilić N. Modification of the aluminum for making offset printing plates. in Journal of the Serbian Chemical Society. 2000;65(12):935-938. doi:10.2298/jsc0012935z .
Živković, Predrag M., Jovanović, Slobodan, Popov, Konstantin I., Ilić, Nenad, "Modification of the aluminum for making offset printing plates" in Journal of the Serbian Chemical Society, 65, no. 12 (2000):935-938, https://doi.org/10.2298/jsc0012935z . .