Micromechanical modelling of fracture toughness in overaged 7000 alloy forgings
Samo za registrovane korisnike
2006
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
In this article, a multiple micromechanisms-based model that quantitatively relates the plane-strain fracture toughness, KIC, of overaged 7000 alloy forgings to their microstructural attributes, fracture surface morphology and basic tensile properties is developed. To verify the proposed model, extensive microstructural and fractographic analyses along with mechanical tests are carried out using three industrially produced alloys with different contents of Fe and Si impurities. The fracture mechanisms are identified and individual contributions to the overall fracture are quantitatively assessed. The fracture toughness is then calculated using the experimentally obtained average values of relevant mechanical properties, area fractions of main fracture modes and microstructural parameters such as volume fraction of coarse intermetallic (IM) particles, their size and spacing, density of intragranular precipitates, number and width of the precipitate-free zones (PFZ). The proposed model c...orrectly predicts the effect of individual microstructural parameters on the overall fracture behaviour.
Ključne reči:
Aluminium alloys / Fractography / Fracture modes / Fracture toughness / Microstructure / ModellingIzvor:
Materials Science and Engineering A, 2006, 434, 1-2, 339-346Izdavač:
- Elsevier
Finansiranje / projekti:
- This work was financially supported by the Ministry of Science and Environmental Protection of the Republic of Serbia through the project no. 144027.
DOI: 10.1016/j.msea.2006.07.018
ISSN: 0921-5093
WoS: 000240896400048
Scopus: 2-s2.0-33748184722
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Cvijović, Zorica AU - Vratnica, M. AU - Rakin, M. PY - 2006 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5451 AB - In this article, a multiple micromechanisms-based model that quantitatively relates the plane-strain fracture toughness, KIC, of overaged 7000 alloy forgings to their microstructural attributes, fracture surface morphology and basic tensile properties is developed. To verify the proposed model, extensive microstructural and fractographic analyses along with mechanical tests are carried out using three industrially produced alloys with different contents of Fe and Si impurities. The fracture mechanisms are identified and individual contributions to the overall fracture are quantitatively assessed. The fracture toughness is then calculated using the experimentally obtained average values of relevant mechanical properties, area fractions of main fracture modes and microstructural parameters such as volume fraction of coarse intermetallic (IM) particles, their size and spacing, density of intragranular precipitates, number and width of the precipitate-free zones (PFZ). The proposed model correctly predicts the effect of individual microstructural parameters on the overall fracture behaviour. PB - Elsevier T2 - Materials Science and Engineering A T1 - Micromechanical modelling of fracture toughness in overaged 7000 alloy forgings EP - 346 IS - 1-2 SP - 339 VL - 434 DO - 10.1016/j.msea.2006.07.018 ER -
@article{ author = "Cvijović, Zorica and Vratnica, M. and Rakin, M.", year = "2006", abstract = "In this article, a multiple micromechanisms-based model that quantitatively relates the plane-strain fracture toughness, KIC, of overaged 7000 alloy forgings to their microstructural attributes, fracture surface morphology and basic tensile properties is developed. To verify the proposed model, extensive microstructural and fractographic analyses along with mechanical tests are carried out using three industrially produced alloys with different contents of Fe and Si impurities. The fracture mechanisms are identified and individual contributions to the overall fracture are quantitatively assessed. The fracture toughness is then calculated using the experimentally obtained average values of relevant mechanical properties, area fractions of main fracture modes and microstructural parameters such as volume fraction of coarse intermetallic (IM) particles, their size and spacing, density of intragranular precipitates, number and width of the precipitate-free zones (PFZ). The proposed model correctly predicts the effect of individual microstructural parameters on the overall fracture behaviour.", publisher = "Elsevier", journal = "Materials Science and Engineering A", title = "Micromechanical modelling of fracture toughness in overaged 7000 alloy forgings", pages = "346-339", number = "1-2", volume = "434", doi = "10.1016/j.msea.2006.07.018" }
Cvijović, Z., Vratnica, M.,& Rakin, M.. (2006). Micromechanical modelling of fracture toughness in overaged 7000 alloy forgings. in Materials Science and Engineering A Elsevier., 434(1-2), 339-346. https://doi.org/10.1016/j.msea.2006.07.018
Cvijović Z, Vratnica M, Rakin M. Micromechanical modelling of fracture toughness in overaged 7000 alloy forgings. in Materials Science and Engineering A. 2006;434(1-2):339-346. doi:10.1016/j.msea.2006.07.018 .
Cvijović, Zorica, Vratnica, M., Rakin, M., "Micromechanical modelling of fracture toughness in overaged 7000 alloy forgings" in Materials Science and Engineering A, 434, no. 1-2 (2006):339-346, https://doi.org/10.1016/j.msea.2006.07.018 . .