Specific characteristics of coating glazes based on basalt
Samo za registrovane korisnike
2012
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Investigations in this paper has been carried out in order to define the correlation between specific characteristics of coating glazes based on basalt, fired faience and appearance and the quality of the ceramic product surface. The paper presents the initial results of research on possibilities for utilisation of basalt from the locality " Vrelo" - Kopaonik Mountain (Serbia) for producing the opaque glaze.From frits with different basalt content (25%, 30%, 35%, and 60%) with addition of water and 5% of the kaolin " Zetlizer" the liquid glazes-suspensions were made (G-1/25, G-2/30, G-3/35, and G-4/60). The primary fired biscuit-shaped faience was used for applying the glazes by dipping, pouring and brushing methods. The further firing process of glazes took place in a laboratory tunnel furnace, under the following operating parameters: temperature T= 980 °C and retention time t= 3. h (hours).The initial investigation has shown that the basalt from the locality Vrelo is suitable for ob...taining applicable glazes, bringing the attractive and decorative colours to the surfaces of the faience ceramics. The best results were achieved by adding the iron pigments.
Izvor:
Materials and Design, 2012, 39, 9-13Izdavač:
- Elsevier Ltd.
Finansiranje / projekti:
- Implementacija savremenijih tehničko-tehnoloških i ekoloških rešenja u postojećim proizvodnim sistemima Rudnika Bakra Bor i Rudnika Bakra Majdanpek (RS-MESTD-Technological Development (TD or TR)-33007)
DOI: 10.1016/j.matdes.2012.02.022
ISSN: 0264-1275
WoS: 000303113900002
Scopus: 2-s2.0-84857743055
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Andrić, Ljubiša AU - Aćimović-Pavlović, Zagorka AU - Trumić, Milan AU - Prstić, Aurel AU - Tanasković, Zorica PY - 2012 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5744 AB - Investigations in this paper has been carried out in order to define the correlation between specific characteristics of coating glazes based on basalt, fired faience and appearance and the quality of the ceramic product surface. The paper presents the initial results of research on possibilities for utilisation of basalt from the locality " Vrelo" - Kopaonik Mountain (Serbia) for producing the opaque glaze.From frits with different basalt content (25%, 30%, 35%, and 60%) with addition of water and 5% of the kaolin " Zetlizer" the liquid glazes-suspensions were made (G-1/25, G-2/30, G-3/35, and G-4/60). The primary fired biscuit-shaped faience was used for applying the glazes by dipping, pouring and brushing methods. The further firing process of glazes took place in a laboratory tunnel furnace, under the following operating parameters: temperature T= 980 °C and retention time t= 3. h (hours).The initial investigation has shown that the basalt from the locality Vrelo is suitable for obtaining applicable glazes, bringing the attractive and decorative colours to the surfaces of the faience ceramics. The best results were achieved by adding the iron pigments. PB - Elsevier Ltd. T2 - Materials and Design T1 - Specific characteristics of coating glazes based on basalt EP - 13 SP - 9 VL - 39 DO - 10.1016/j.matdes.2012.02.022 ER -
@article{ author = "Andrić, Ljubiša and Aćimović-Pavlović, Zagorka and Trumić, Milan and Prstić, Aurel and Tanasković, Zorica", year = "2012", abstract = "Investigations in this paper has been carried out in order to define the correlation between specific characteristics of coating glazes based on basalt, fired faience and appearance and the quality of the ceramic product surface. The paper presents the initial results of research on possibilities for utilisation of basalt from the locality " Vrelo" - Kopaonik Mountain (Serbia) for producing the opaque glaze.From frits with different basalt content (25%, 30%, 35%, and 60%) with addition of water and 5% of the kaolin " Zetlizer" the liquid glazes-suspensions were made (G-1/25, G-2/30, G-3/35, and G-4/60). The primary fired biscuit-shaped faience was used for applying the glazes by dipping, pouring and brushing methods. The further firing process of glazes took place in a laboratory tunnel furnace, under the following operating parameters: temperature T= 980 °C and retention time t= 3. h (hours).The initial investigation has shown that the basalt from the locality Vrelo is suitable for obtaining applicable glazes, bringing the attractive and decorative colours to the surfaces of the faience ceramics. The best results were achieved by adding the iron pigments.", publisher = "Elsevier Ltd.", journal = "Materials and Design", title = "Specific characteristics of coating glazes based on basalt", pages = "13-9", volume = "39", doi = "10.1016/j.matdes.2012.02.022" }
Andrić, L., Aćimović-Pavlović, Z., Trumić, M., Prstić, A.,& Tanasković, Z.. (2012). Specific characteristics of coating glazes based on basalt. in Materials and Design Elsevier Ltd.., 39, 9-13. https://doi.org/10.1016/j.matdes.2012.02.022
Andrić L, Aćimović-Pavlović Z, Trumić M, Prstić A, Tanasković Z. Specific characteristics of coating glazes based on basalt. in Materials and Design. 2012;39:9-13. doi:10.1016/j.matdes.2012.02.022 .
Andrić, Ljubiša, Aćimović-Pavlović, Zagorka, Trumić, Milan, Prstić, Aurel, Tanasković, Zorica, "Specific characteristics of coating glazes based on basalt" in Materials and Design, 39 (2012):9-13, https://doi.org/10.1016/j.matdes.2012.02.022 . .