Strength and reliability of open cross-section thin wall beams in a raft load-bearing structure
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The aim of this paper is to present the application of
thin-walled beams on cargo raft load-bearing structure from
the aspect of strength and reliability. The beams have an
open cross section. Analytical and numerical determination
of equivalent stresses and deformations of open section thinwalled ‘U’ and ‘Z’ cantilever beams, loaded with torsion, is
presented. Work is divided into three parts. In the first part,
equivalent stress and deformation are obtained analytically
for cantilever beam model in the whole cross section. In the
second part, the finite element method is applied in beam
models, and the results are compared with the analytical
calculation. The third part presents the profiles installed in
load-bearing structures of vessels (rafts) and solutions are
shown to apply results of the presented analyses in order to
increase reliability. Finally, the design calculation of the raft
load-bearing structure is shown.
Cilj ovog rada jeste da prikaže primenu tankozidih nosača
na noseće konstrukcije teretnog splava sa aspekta čvrstoće
i pouzdanosti. Nosači su sa otvorenim poprečnim presekom.
U radu je prikazano analitičko i numeričko određivanje ekvivalentnog napona i deformacije kod U i Z tankozidih konzola
otvorenog poprečnog preseka opterećenih na uvijanje. U
radu se izdvajaju tri celine. U prvom delu je analitički dobijen ekvivalentni napon i deformacija za model sa uklještenjem, po celom poprečnom preseku. U drugom delu se primenjuje metoda konačnih elemenata na modele nosača, a dobijeni rezultati su upoređeni sa analitičkim proračunom. U
trećem delu su prikazani profili koji se ugrađuju u noseće
konstrukcije plovnih objekata (splavova) i dat je način kako
bi mogli da se iskoriste rezultati prikazanih analiza u cilju
povećanja njihove pouzdanosti. Takođe, u trećem delu rada
je urađen proračun noseće konstrukcije splava.
Кључне речи:
thin-walled beams / finite element method (FEM) / equivalent stress / deformation / tankozidi nosači / metod konačnih elemenata (MKE) / ekvivalentni napon / deformacijaИзвор:
INTEGRITET I VEK KONSTRUKCIJA, 2022, 22, 3, 335-338Издавач:
- Society for Structural Integrity and Life, Institute for Material Testing, Serbia
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200213 (Иновациони центар Машинског факултета у Београду доо) (RS-MESTD-inst-2020-200213)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Институција/група
Inovacioni centarTY - JOUR AU - Đurđević, Đorđe AU - Đurđević, Andrijana AU - Anđelić, Nina AU - Milošević-Mitić, Vesna AU - Antić, Katarina PY - 2022 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5986 AB - The aim of this paper is to present the application of thin-walled beams on cargo raft load-bearing structure from the aspect of strength and reliability. The beams have an open cross section. Analytical and numerical determination of equivalent stresses and deformations of open section thinwalled ‘U’ and ‘Z’ cantilever beams, loaded with torsion, is presented. Work is divided into three parts. In the first part, equivalent stress and deformation are obtained analytically for cantilever beam model in the whole cross section. In the second part, the finite element method is applied in beam models, and the results are compared with the analytical calculation. The third part presents the profiles installed in load-bearing structures of vessels (rafts) and solutions are shown to apply results of the presented analyses in order to increase reliability. Finally, the design calculation of the raft load-bearing structure is shown. AB - Cilj ovog rada jeste da prikaže primenu tankozidih nosača na noseće konstrukcije teretnog splava sa aspekta čvrstoće i pouzdanosti. Nosači su sa otvorenim poprečnim presekom. U radu je prikazano analitičko i numeričko određivanje ekvivalentnog napona i deformacije kod U i Z tankozidih konzola otvorenog poprečnog preseka opterećenih na uvijanje. U radu se izdvajaju tri celine. U prvom delu je analitički dobijen ekvivalentni napon i deformacija za model sa uklještenjem, po celom poprečnom preseku. U drugom delu se primenjuje metoda konačnih elemenata na modele nosača, a dobijeni rezultati su upoređeni sa analitičkim proračunom. U trećem delu su prikazani profili koji se ugrađuju u noseće konstrukcije plovnih objekata (splavova) i dat je način kako bi mogli da se iskoriste rezultati prikazanih analiza u cilju povećanja njihove pouzdanosti. Takođe, u trećem delu rada je urađen proračun noseće konstrukcije splava. PB - Society for Structural Integrity and Life, Institute for Material Testing, Serbia T2 - INTEGRITET I VEK KONSTRUKCIJA T1 - Strength and reliability of open cross-section thin wall beams in a raft load-bearing structure EP - 338 IS - 3 SP - 335 VL - 22 UR - https://hdl.handle.net/21.15107/rcub_technorep_5986 ER -
@article{ author = "Đurđević, Đorđe and Đurđević, Andrijana and Anđelić, Nina and Milošević-Mitić, Vesna and Antić, Katarina", year = "2022", abstract = "The aim of this paper is to present the application of thin-walled beams on cargo raft load-bearing structure from the aspect of strength and reliability. The beams have an open cross section. Analytical and numerical determination of equivalent stresses and deformations of open section thinwalled ‘U’ and ‘Z’ cantilever beams, loaded with torsion, is presented. Work is divided into three parts. In the first part, equivalent stress and deformation are obtained analytically for cantilever beam model in the whole cross section. In the second part, the finite element method is applied in beam models, and the results are compared with the analytical calculation. The third part presents the profiles installed in load-bearing structures of vessels (rafts) and solutions are shown to apply results of the presented analyses in order to increase reliability. Finally, the design calculation of the raft load-bearing structure is shown., Cilj ovog rada jeste da prikaže primenu tankozidih nosača na noseće konstrukcije teretnog splava sa aspekta čvrstoće i pouzdanosti. Nosači su sa otvorenim poprečnim presekom. U radu je prikazano analitičko i numeričko određivanje ekvivalentnog napona i deformacije kod U i Z tankozidih konzola otvorenog poprečnog preseka opterećenih na uvijanje. U radu se izdvajaju tri celine. U prvom delu je analitički dobijen ekvivalentni napon i deformacija za model sa uklještenjem, po celom poprečnom preseku. U drugom delu se primenjuje metoda konačnih elemenata na modele nosača, a dobijeni rezultati su upoređeni sa analitičkim proračunom. U trećem delu su prikazani profili koji se ugrađuju u noseće konstrukcije plovnih objekata (splavova) i dat je način kako bi mogli da se iskoriste rezultati prikazanih analiza u cilju povećanja njihove pouzdanosti. Takođe, u trećem delu rada je urađen proračun noseće konstrukcije splava.", publisher = "Society for Structural Integrity and Life, Institute for Material Testing, Serbia", journal = "INTEGRITET I VEK KONSTRUKCIJA", title = "Strength and reliability of open cross-section thin wall beams in a raft load-bearing structure", pages = "338-335", number = "3", volume = "22", url = "https://hdl.handle.net/21.15107/rcub_technorep_5986" }
Đurđević, Đ., Đurđević, A., Anđelić, N., Milošević-Mitić, V.,& Antić, K.. (2022). Strength and reliability of open cross-section thin wall beams in a raft load-bearing structure. in INTEGRITET I VEK KONSTRUKCIJA Society for Structural Integrity and Life, Institute for Material Testing, Serbia., 22(3), 335-338. https://hdl.handle.net/21.15107/rcub_technorep_5986
Đurđević Đ, Đurđević A, Anđelić N, Milošević-Mitić V, Antić K. Strength and reliability of open cross-section thin wall beams in a raft load-bearing structure. in INTEGRITET I VEK KONSTRUKCIJA. 2022;22(3):335-338. https://hdl.handle.net/21.15107/rcub_technorep_5986 .
Đurđević, Đorđe, Đurđević, Andrijana, Anđelić, Nina, Milošević-Mitić, Vesna, Antić, Katarina, "Strength and reliability of open cross-section thin wall beams in a raft load-bearing structure" in INTEGRITET I VEK KONSTRUKCIJA, 22, no. 3 (2022):335-338, https://hdl.handle.net/21.15107/rcub_technorep_5986 .