The Effect of Acrylate on the Properties and Machinability of Alumina Ceramics
Article (Published version)
Metadata
Show full item recordAbstract
Effect of methyl methacrylate (MMA) as a binder and heating treatment were investigated to improve green alumina compacts machinability. Properties of green compacts and their corresponding sintered samples prepared with and without MMA were compared. Investigation of green and sintered properties was performed on samples compacted at applied pressures up to 150 MPa. After pressing, samples with MMA were thermally treated at 115oC. The intention was to enhance the polymerization of MMA at a temperature a little higher than the glass transition temperature (Tg = 103°C) of poly (methyl methacrylate). Green compacts with MMA had higher green density values than those without MMA. Sintered samples with MMA had lower values of sintered density and higher values of total porosity; after sintering, relative linear shrinkage was around 15 % for the whole range of applied pressures. The possibility of easily machining the green compacts with MMA produces great possibilities for application in m...any fields.
Испитиван je утицај метил метакрилата (ММА) као везива као и утицај термичког третманана машинску обрадивост испресака од алумине. Упоређена су својства како код испресака од алумине припремљених са и без ММА тако и код њима одговарајућих синтерованих узорака. Испитивање особина испресака и синтерованих узоракаизведено је на узорцима који су испресовани на притисцима до 150 МРа. Након пресовања, узорци са ММА су термички третирани на 115о С са намером да ММА полимеризује на нешто вишој температури од температуре стакластог прелаза (Тg = 103°C) поли(метил метакрилата. Испресци са ММА имали су веће густине од испресака без ММА. Синтеровани узорци припремљени са ММА имали су ниже синтероване густине и већу укупну порозност, aнакон синтеровања, релативно линеарно скупљање је било око 15 % за цео опсег примењених притисака пресовања. Пробе машинске обрадљивости показале су да машинска обрада испресака са ММА има велике могућности за комерцијалну примену.
Keywords:
Acrylic binder / Alumina ceramics / Machining / Thermal treatment / акрилно везиво / алумина / машинска обрада / термички третманSource:
Science of Sintering, 2023, 55, 1, 103-113Publisher:
- International Institute for the Science of Sintering (IISS)
Funding / projects:
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia, institutional funding - 200017 (University of Belgrade, Institute of Nuclear Sciences 'Vinča', Belgrade-Vinča) (RS-MESTD-inst-2020-200017)
Institution/Community
Tehnološko-metalurški fakultetTY - JOUR AU - Kokunešoski, Maja AU - Janaćković, Đorđe AU - Kićević, Dušan AU - Ilić, Svetlana AU - Šaponjić, Aleksandra PY - 2023 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6468 AB - Effect of methyl methacrylate (MMA) as a binder and heating treatment were investigated to improve green alumina compacts machinability. Properties of green compacts and their corresponding sintered samples prepared with and without MMA were compared. Investigation of green and sintered properties was performed on samples compacted at applied pressures up to 150 MPa. After pressing, samples with MMA were thermally treated at 115oC. The intention was to enhance the polymerization of MMA at a temperature a little higher than the glass transition temperature (Tg = 103°C) of poly (methyl methacrylate). Green compacts with MMA had higher green density values than those without MMA. Sintered samples with MMA had lower values of sintered density and higher values of total porosity; after sintering, relative linear shrinkage was around 15 % for the whole range of applied pressures. The possibility of easily machining the green compacts with MMA produces great possibilities for application in many fields. AB - Испитиван je утицај метил метакрилата (ММА) као везива као и утицај термичког третманана машинску обрадивост испресака од алумине. Упоређена су својства како код испресака од алумине припремљених са и без ММА тако и код њима одговарајућих синтерованих узорака. Испитивање особина испресака и синтерованих узоракаизведено је на узорцима који су испресовани на притисцима до 150 МРа. Након пресовања, узорци са ММА су термички третирани на 115о С са намером да ММА полимеризује на нешто вишој температури од температуре стакластог прелаза (Тg = 103°C) поли(метил метакрилата. Испресци са ММА имали су веће густине од испресака без ММА. Синтеровани узорци припремљени са ММА имали су ниже синтероване густине и већу укупну порозност, aнакон синтеровања, релативно линеарно скупљање је било око 15 % за цео опсег примењених притисака пресовања. Пробе машинске обрадљивости показале су да машинска обрада испресака са ММА има велике могућности за комерцијалну примену. PB - International Institute for the Science of Sintering (IISS) T2 - Science of Sintering T1 - The Effect of Acrylate on the Properties and Machinability of Alumina Ceramics EP - 113 IS - 1 SP - 103 VL - 55 DO - 10.2298/SOS2301103K ER -
@article{ author = "Kokunešoski, Maja and Janaćković, Đorđe and Kićević, Dušan and Ilić, Svetlana and Šaponjić, Aleksandra", year = "2023", abstract = "Effect of methyl methacrylate (MMA) as a binder and heating treatment were investigated to improve green alumina compacts machinability. Properties of green compacts and their corresponding sintered samples prepared with and without MMA were compared. Investigation of green and sintered properties was performed on samples compacted at applied pressures up to 150 MPa. After pressing, samples with MMA were thermally treated at 115oC. The intention was to enhance the polymerization of MMA at a temperature a little higher than the glass transition temperature (Tg = 103°C) of poly (methyl methacrylate). Green compacts with MMA had higher green density values than those without MMA. Sintered samples with MMA had lower values of sintered density and higher values of total porosity; after sintering, relative linear shrinkage was around 15 % for the whole range of applied pressures. The possibility of easily machining the green compacts with MMA produces great possibilities for application in many fields., Испитиван je утицај метил метакрилата (ММА) као везива као и утицај термичког третманана машинску обрадивост испресака од алумине. Упоређена су својства како код испресака од алумине припремљених са и без ММА тако и код њима одговарајућих синтерованих узорака. Испитивање особина испресака и синтерованих узоракаизведено је на узорцима који су испресовани на притисцима до 150 МРа. Након пресовања, узорци са ММА су термички третирани на 115о С са намером да ММА полимеризује на нешто вишој температури од температуре стакластог прелаза (Тg = 103°C) поли(метил метакрилата. Испресци са ММА имали су веће густине од испресака без ММА. Синтеровани узорци припремљени са ММА имали су ниже синтероване густине и већу укупну порозност, aнакон синтеровања, релативно линеарно скупљање је било око 15 % за цео опсег примењених притисака пресовања. Пробе машинске обрадљивости показале су да машинска обрада испресака са ММА има велике могућности за комерцијалну примену.", publisher = "International Institute for the Science of Sintering (IISS)", journal = "Science of Sintering", title = "The Effect of Acrylate on the Properties and Machinability of Alumina Ceramics", pages = "113-103", number = "1", volume = "55", doi = "10.2298/SOS2301103K" }
Kokunešoski, M., Janaćković, Đ., Kićević, D., Ilić, S.,& Šaponjić, A.. (2023). The Effect of Acrylate on the Properties and Machinability of Alumina Ceramics. in Science of Sintering International Institute for the Science of Sintering (IISS)., 55(1), 103-113. https://doi.org/10.2298/SOS2301103K
Kokunešoski M, Janaćković Đ, Kićević D, Ilić S, Šaponjić A. The Effect of Acrylate on the Properties and Machinability of Alumina Ceramics. in Science of Sintering. 2023;55(1):103-113. doi:10.2298/SOS2301103K .
Kokunešoski, Maja, Janaćković, Đorđe, Kićević, Dušan, Ilić, Svetlana, Šaponjić, Aleksandra, "The Effect of Acrylate on the Properties and Machinability of Alumina Ceramics" in Science of Sintering, 55, no. 1 (2023):103-113, https://doi.org/10.2298/SOS2301103K . .