Two-phase electro-magneto-fluid dynamics model and its computational fluid dynamics implementation
Samo za registrovane korisnike
2024
Članak u časopisu (Objavljena verzija)
,
Published under an exclusive license by AIP Publishing.
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
In this work, we present a two-phase electro-magneto-fluid dynamics (EMFD) model that merges electromagnetics and fluid dynamics. The model is suitable for use in computational fluid dynamics (CFD) software and was incorporated into OpenFOAM® after deriving appropriate equations that bypassed certain limitations of the software. Currently, there is lack of even single-phase EMFD models that can be incorporated into CFD software; however, simpler models from electrohydrodynamics (EHD) and magnetohydrodynamics (MHD) are being implemented although they have certain approximations that can limit their applicability. We conclude that the derived EMFD model is applicable, and show its quality by implementing it and analyzing the results. We use cases with a droplet and the electrospinning process for verification. The drop deformations obtained were closer to analytical predictions than in the literature for two EHD models, but some oscillations were observed. We compared one simulation to t...he prediction of an analytical equation from MHD, and good agreement was shown. Finally, we simulate the electrospinning process, and the results were very close to the analytical predictions. We conclude that the implementation can be used for both EHD and MHD cases.
Izvor:
Physics of Fluids, 2024, 36, 2, 022019-Izdavač:
- American Institute of Physics Inc.
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200287 (Inovacioni centar Tehnološko-metalurškog fakulteta u Beogradu doo) (RS-MESTD-inst-2020-200287)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200135 (Univerzitet u Beogradu, Tehnološko-metalurški fakultet) (RS-MESTD-inst-2020-200135)
- MultiPromis - Multifunctional leaf protein and assembled nanocarrier structures delivered by enzyme technology (RS-ScienceFundRS-Ideje-7751519)
Napomena:
- This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in S. A. Bošković & B. Bugarski, Phys. Fluids 36, 022019 (2024) and may be found at https://doi.org/10.1063/5.0190651.
- Peer reviewed manuscript: https://technorep.tmf.bg.ac.rs/handle/123456789/7288
Povezane informacije:
- Verzija dokumenta
https://technorep.tmf.bg.ac.rs/handle/123456789/7288
Kolekcije
Institucija/grupa
Inovacioni centarTY - JOUR AU - Bošković, Stefan A. AU - Bugarski, Branko PY - 2024 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7348 AB - In this work, we present a two-phase electro-magneto-fluid dynamics (EMFD) model that merges electromagnetics and fluid dynamics. The model is suitable for use in computational fluid dynamics (CFD) software and was incorporated into OpenFOAM® after deriving appropriate equations that bypassed certain limitations of the software. Currently, there is lack of even single-phase EMFD models that can be incorporated into CFD software; however, simpler models from electrohydrodynamics (EHD) and magnetohydrodynamics (MHD) are being implemented although they have certain approximations that can limit their applicability. We conclude that the derived EMFD model is applicable, and show its quality by implementing it and analyzing the results. We use cases with a droplet and the electrospinning process for verification. The drop deformations obtained were closer to analytical predictions than in the literature for two EHD models, but some oscillations were observed. We compared one simulation to the prediction of an analytical equation from MHD, and good agreement was shown. Finally, we simulate the electrospinning process, and the results were very close to the analytical predictions. We conclude that the implementation can be used for both EHD and MHD cases. PB - American Institute of Physics Inc. T2 - Physics of Fluids T1 - Two-phase electro-magneto-fluid dynamics model and its computational fluid dynamics implementation IS - 2 SP - 022019 VL - 36 DO - 10.1063/5.0190651 ER -
@article{ author = "Bošković, Stefan A. and Bugarski, Branko", year = "2024", abstract = "In this work, we present a two-phase electro-magneto-fluid dynamics (EMFD) model that merges electromagnetics and fluid dynamics. The model is suitable for use in computational fluid dynamics (CFD) software and was incorporated into OpenFOAM® after deriving appropriate equations that bypassed certain limitations of the software. Currently, there is lack of even single-phase EMFD models that can be incorporated into CFD software; however, simpler models from electrohydrodynamics (EHD) and magnetohydrodynamics (MHD) are being implemented although they have certain approximations that can limit their applicability. We conclude that the derived EMFD model is applicable, and show its quality by implementing it and analyzing the results. We use cases with a droplet and the electrospinning process for verification. The drop deformations obtained were closer to analytical predictions than in the literature for two EHD models, but some oscillations were observed. We compared one simulation to the prediction of an analytical equation from MHD, and good agreement was shown. Finally, we simulate the electrospinning process, and the results were very close to the analytical predictions. We conclude that the implementation can be used for both EHD and MHD cases.", publisher = "American Institute of Physics Inc.", journal = "Physics of Fluids", title = "Two-phase electro-magneto-fluid dynamics model and its computational fluid dynamics implementation", number = "2", pages = "022019", volume = "36", doi = "10.1063/5.0190651" }
Bošković, S. A.,& Bugarski, B.. (2024). Two-phase electro-magneto-fluid dynamics model and its computational fluid dynamics implementation. in Physics of Fluids American Institute of Physics Inc.., 36(2), 022019. https://doi.org/10.1063/5.0190651
Bošković SA, Bugarski B. Two-phase electro-magneto-fluid dynamics model and its computational fluid dynamics implementation. in Physics of Fluids. 2024;36(2):022019. doi:10.1063/5.0190651 .
Bošković, Stefan A., Bugarski, Branko, "Two-phase electro-magneto-fluid dynamics model and its computational fluid dynamics implementation" in Physics of Fluids, 36, no. 2 (2024):022019, https://doi.org/10.1063/5.0190651 . .