Search
Now showing items 31-40 of 714
Hydro- and solvothermally-prepared ZnO and its catalytic effect on the photodegradation of Reactive Orange 16 dye
(Srpsko hemijsko društvo, Beograd, 2014)
In this work, zinc oxide powders were obtained by two different techniques: hydro- and solvothermal synthesis starting from Zn(NO3)(2) and Zn(CH3COO)(2), respectively. The influence of synthetic procedure on the structural, ...
Modification of natural clinoptilolite for nitrate removal from aqueous media
(Srpsko hemijsko društvo, Beograd, 2014)
Natural zeolitic tuff from the Zlatokop mine (Vranjska Banja deposit, Serbia) was investigated as the starting material to obtain a low cost adsorbent for the removal of nitrate from aqueous media. The tuff rich in zeolite, ...
The nano-wetting aspect at the liquid-metal/sic interface
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2015)
The wetting process on the nano-scale, as an initial and essential step in liquid metal/ceramic joining, is discussed here. Thanks to recent breakthroughs in experimental techniques with nanometre resolution, questions ...
Modeling of metallurgical properties of sinter mixtures of nonstandard raw iron-bearing materials
(Editura Stiintifica Fmr, Bucharest, 2013)
Present paper represents a methodology for establishing a relationship between the composition of mixtures of iron-bearing non-standard dispersed raw materials for production of sinter and its most important metallurgical ...
Alkyl polyglucoside-stabilized emulsion as a prospective vehicle for usnea barbata CO2-supercritical extract: Assessing stability, safety and efficiency of a topical formulation / Emulzija stabilizovana alkil poliglukozidnim emulgatorom kao potencijalni nosač za CO2-natkritični ekstrakt vrste Usnea barbata - procena stabilnosti, bezbednosti i efikasnosti topikalne formulacije
(Association of Chemical Engineers of Serbia, 2015)
Antimicrobial activity of Usnea barbata especially against bacteria involved in pathogenesis of various skin conditions has been well documented in literature. Nevertheless, there are no papers dealing with formulation of ...
Solvent and Structure Effects on Electronic Absorption Spectra of the Isomeric Pyridinecarboxylic Acids
(Springer, New York, 2014)
Ultraviolet absorption spectra of three isomeric pyridinecarboxylic acids (picolinic, nicotinic, and isonicotinic acids) were measured in 18 various solvents, in the wavelength range from 200 to 400 nm. In order to analyze ...
Moisture management properties of plain knitted fabrics made of natural and regenerated cellulose fibres / Sposobnost upravljanja vlagom glatkih pletenina izrađenih od prirodnih i regenerisanih celuloznih vlakana
(Association of Chemical Engineers of Serbia, 2015)
Moisture management is a complicated process which is known to be influenced by a variety of fabric characteristics such as fibre nature (hydrophilic or hydrophobic), porosity and thickness. There are different aspects of ...
Influence of pin geometry on mechanical and structural properties of butt friction stir welded 2024-T351 aluminum alloy / Uticaj geometrije trna alata na mehaničke i strukturne karakteristike sučeonog spoja aluminijumske legure 2024-T351 zavarenog postupkom FSW
(Association of Chemical Engineers of Serbia, 2015)
The aim of this work was to investigate the combined effect of small difference in pin geometry, together with rotation and welding speed on the weldability, mechanical and structural properties of FSW 2024-T351 Al plates. ...
Iron-chromium-carbon-vanadium white cast irons: The microstructure and properties / Železo-hrom-ugljenik-vanadijum bela livena gvozđa - mikrostruktura i svojstva
(Association of Chemical Engineers of Serbia, 2014)
The as-cast microstructure of Fe-Cr-C-V white irons consists of M7C3 and vanadium rich M6C5 carbides in austenitic matrix. Vanadium changed the microstructure parameters of phase present in the structure of these alloys, ...
Dependence of Structural Characteristics of Polyamide Textured Yarns on the Parameters of the False Twist Yarn Texturing Process
(Inst Chemical Fibres, Lodz, 2017)
In the false twist texturing process, due to the action of mechanical forces and heat, a disorientation of structural elements happens at all levels of the supramolecular structure. These changes are related to changes in ...