Претраживање
Приказ резултата 31-40 од 471
Creep crack growth - Comparison of two steel P91 and P22
(14th International Conference on Fracture, ICF 2017, 2017)
The deformation and crack growth behaviour of P22 and P91 steel weldments tested at 550 °C and 600 °C, respectively,compact C(T) type specimens with sharp EDM starter notches in the base metal (BM) and heat affected zone ...
New multifunctional materials based on steel slag
(Belgrade : Materials Research Society of Serbia, 2018)
Electric arc furnace slag (EAFS) is the by-product of steel production in an electric arc furnace. In a pass two decade a special attention is paid to the valorization of metallurgical slags by alkali activation. The process ...
A novel type of building material derived from the by-products of steel making industry
(Belgrade : Materials Research Society of Serbia, 2019)
Electric arc furnace slag (EAFS) and electric arc furnace dust (EAFD) are the waste materials generated during the iron and steel scrap remelting in electric arc furnace. EAFS is non-hazardous material which has found its ...
Antibacterial activity of clove essential oil against food-borne pathogenic bacteria
(UDRUŽENJE MIKROBIOLOGA SRBIJE, 2018)
INTRODUCTION: Food infection and intoxication are still a major problem worldwide, in spite of the modern methods used to preserve food. Application of synthetic preservatives may lead to negative health consequences and ...
Are the Tube Microreactors Future of Wastewater Treatment?
(Belgrade : Association of Chemists and Chemical Engineers of Serbia UHTS, 2019)
In the industry, wastewater is important environmental problem. Due to the growing
environmental concern this problem became one of key issues. Large amounts of highly
contaminated wastewater, as consequence of industrial ...
Evaluation of nonlinear frequency response method for the hydrolysis of acetic anhydride
(22nd International Congress of Chemical and Process Engineering (CHISA 2016), Prague, Czech Republic, 2016)
The method of nonlinear frequency response (NFR) attempts to predict the outcome of perturbation for the instructive input variables using nonlinear functions within the model equations. The aim of the derived models is ...
Industrial use of a new ultrasound spray for coolin and wet gas treatment in the pyrometallurgical processes
(141st Annual Meeting and Exhibition, TMS 2012, 2012)
This paper presents the results of a new industrial use the ultrasonic spray for gas cooling from sulphide copper concentrate roasting in the fluo solid reactor and the results of wet gas treatment (washing) in the scrubber ...
Shape Controlled, Carbon Supported Pt Anodic Catalysts for DFAFC
(Academician Evgeni Budevski Institute of Electrochemistry and Energy Systems Bulgarian Academy of Sciences, Sofia, Bulgaria, 2015)
Electrocatalytic activity of platinum-based electrocatalysts used in fuel cells has been well recognized. However, significant attention remains on the particle shape and size control of such nanomaterials. Catalytic ...
Heat generation and removal in fixed-bed reactors for fischer-tropsch synthesis
(Catalysis and Reaction Engineering Division 2017 - Core Programming Area at the 2017 AIChE Annual Meeting, 2017)
Fabrication and applications of multifunctional nanostructured TiO2
(Belgrade : Faculty of Agriculture, Department for Agricultural Engineering, 2017)
Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be ...