Претраживање
Приказ резултата 1-10 од 43
Secondary measures for reduction of NOx emission in glass melting process / Sekundarni postupci smanjenja emisije oksida azota u procesu topljenja stakla
(Savez inženjera i tehničara Srbije, Beograd, 2012)
In this paper the new methods for reduction of NOx emission from glass melting furnaces were presented. The secondary measures are focused on development of different methods for elimination of nitrogen oxide from the smoke ...
Swelling kinetics and impregnation of PLA with thymol under supercritical CO2 conditions / Kinetika bubrenja PLA i njegova impregnacija timolom upotrebom natkritičnog uglenik(IV)-oksida
(Savez inženjera i tehničara Srbije, Beograd, 2016)
The present work was aimed to study swelling kinetics of polylactic acid (PLA) and its impregnation with thymol in supercritical carbon dioxide (scCO2) medium. The influences of temperature and soaking time on the swelling ...
Optimal conditions of vacuum distillation process for obtaining the high grade pure magnesium / Optimalni uslovi porcesa vakuumske destilacije za dobijanje magnezijuma visoke čistoće
(Savez inženjera i tehničara Srbije, Beograd, 2014)
In this paper the procedure of obtaining of high purity magnesium by using the vacuum distillation process has been shown. Vacuum distillation process has been conducted under low and high vacuum at different operating ...
Micromechanical properties of composite systems consisting of electrodeposited nickel coatings on different substrates / Mikromehanička svojstva kompozitnih sistema formiranih elektrohemijskim taloženjem filmova nikla i bakra na različitim podlogama
(Savez inženjera i tehničara Srbije, Beograd, 2012)
Fine-grained nickel and copper thin films were electrodeposited (ED) from self-made sulphamate and sulphate electrolytes, respectively, on different substrates. The substrates were single crystal silicon with two different ...
Simulation of blast furnace operation during the substitution of coke and pulverized coal with granulated waste plastic / Simulacija rada visoke peći prilikom supstitucije koksa i sprašenog uglja granulisanom otpadnom plastikom
(Savez inženjera i tehničara Srbije, Beograd, 2014)
The possibility of using the waste plastic as reducing agent in blast furnace for obtaining pig iron is in focus for the past couple year. The simulation of blast furnace process in BFC software has been performed in order ...
Micromechanical properties of composite systems consisting of electrodeposited nickel coatings on different substrates / Mikromehanička svojstva kompozitnih sistema formiranih elektrohemijskim taloženjem filmova nikla i bakra na različitim podlogama
(Savez inženjera i tehničara Srbije, Beograd, 2012)
Fine-grained nickel and copper thin films were electrodeposited (ED) from self-made sulphamate and sulphate electrolytes, respectively, on different substrates. The substrates were single crystal silicon with two different ...
The application of the zeolyte powder for the construction of the dense composite membranes for the carbon-dioxide separation / Primena zeolitnih prahova za izradu kompozitnih polimernih membrana za separaciju ugljen-dioksida
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The main task of the work is to construct the polymeric membrane that could be used for the waste gases treatment. For this purpose, membrane must have high permeability for the carbon dioxide and low permeability of the ...
Antimicrobial hydrogels based on 2-hydroxyethyl methacrylate and itaconic acid containing silver(I) ion / Antimikrobni hidrogelovi na bazi 2-hidroksietil metakrilata i itakonske kiseline koji sadrže srebro(I) jon
(Savez inženjera i tehničara Srbije, Beograd, 2014)
The objective of our study was to develop new antimicrobial hydrogels silver/poly(2-hydroxyethyl methacrylate/ itaconic acid) (Ag/P(HEMA/IA)). The P(HEMA/IA) samples, with different HEMA/IA ratio, were prepared by free ...
Formic acid electrooxidation on carbon supported platinum catalyst with preferential plane orientation / Oksidacija mravlje kiseline na platinskim katalizatorima na ugljeničnom nosaču sa preferencijalno orijentisanim ravnima
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Pt-based nanocatalysts supported on Vulcan XC-72R carbon, were prepared by water-in-oil microemulsion method, with addition of various amounts of HCl in the water phase. Polyethileneglycoldodecylether (BRIJ 30) was used ...
Optimization of the process of calcium-carbonate dispersion stabilization for paper industry needs / Proces dobijanja stabilne disperzije kalcijum-karbonata za potrebe papirne industije
(Savez inženjera i tehničara Srbije, Beograd, 2018)
This paper presents the optimized technological process for obtaining stable calcium carbonate dispersion (CaCO3) in accordance to the standard prescribed in the paper industry. The reason for using CaCO3 in paper production ...