Претраживање
Приказ резултата 1-10 од 255
Preparation of nanocomposites based on thermoplastic polymers and influence of titanium and iron oxides nanoparticles on their properties / Dobijanje nanokompozita na bazi termoplastičnih polimera i uticaj nanočestica oksida titana i gvožđa na njihova svojstva
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
The synthesis of polymer nanocomposites by in situ polymerization of monomers in the presence of filler particles is presented in this dissertation. Nanoparticles of TiO2 and α-Fe2O3 were used as fillers. Polymer nanocomposites ...
Modeling and Energy Optimization of the Catalytic Naphtha Reforming Process / Modelovanje i energetska optimizacija progresa katalitičkog reforminga benzina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
Catalytic naphtha reforming is one of the primary processes of naphtha refining. This process is used for the production of the primary component of high-octane motor fuels and also for the production of feedstock for ...
Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition
(Springer, New York, 2010)
Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a ...
Study of the mechanisms of heavy metal sorption by mineral apatite: the feasibility of soil and ground water remediation / Izučavanje mehanizama sorpcije teških metala apatitom : mogućnost primene u remedijaciji zagađenog zemljišta i podzemnih voda
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
In this work, the mechanisms of heavy metal sorption by two forms of mineral apatite were studied. The materials used include synthetic hydroxyapatite (HAP) and natural apatite from Lisina ore deposit (LA). The materials ...
The study of the reactivity of carboxylic acids by the method of linear solvation energy correlations / Proučavanje reaktivnosti karboksilnih kiselina metodom linearne korelacije solvatacionih energija
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
As a part of the research of solvent influence on the reactivity of organic compounds the reaction of carboxylic acids with diazodiphenylmethane(DDM) was chosen as a model. Rate constants for acids of various structure: ...
Characterisation of High-Carbon Steel Surface Welded Layer
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2010)
In this paper microstructural and mechanical properties of high-carbon steel surface welded layer obtained with self-shielded flux cored wire are presented in standard rails and crossings. The testing results of tensile ...
Antimicrobial Bioactive Band-Aids with Prolonged and Controlled Action
(Medical and Healthcare Textiles, 2010)
The paper discusses the antimicrobial bioactive band-aids, a modem means of wound management and healing, which are effective against a wide spectrum of microorganisms. Ion-exchange fibres and nonwoven textile materials ...
Introduction of cleaner production in the tank farm of the Pancevo Oil Refinery, Serbia
(Elsevier Sci Ltd, Oxford, 2010)
This work studies the introduction of cleaner production (UP) in the tank farm of the Pancevo Oil Refinery. From 2003 to 2008, substantial investments in storage technology and equipment were made in order to minimize the ...
Investigation of the influence of processing parameters on the properties of bioceramic materials based on calcium hydroxyapatite and calcium phosphate obtained by different sintering technique / Ispitivanje uticaja parametara procesiranja na svojstva biokeramičkih materijala na bazi kalcijum-hidroksiapatita i kalcijum-fosfata dobijenih različitim tehnikama sinterovanja
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
Calcium phosphate bioceramics materials based on hydroxyapatite (HAP) and tricalcium phosphate (TCP), due to their chemical composition, excellent biocompatibility, bioactivity and osteoconduction have received considerable ...
Reliable prediction of heat of vaporization of n-alkanes at 298.15 K / Pouzdan model za predskazivanje toplote isparavanja n-alkana na 298,15 K
(Serbian Chemical Society, Belgrade, 2010)
A reliable model for the prediction of the heat of vaporization for n-alkanes at 298.15 K with the number of carbon atoms and normal boiling point as the only input parameters is recommended. The new model is compared with ...