Претраживање
Приказ резултата 51-60 од 66
Heterogeneous kinetics of vegetable oil transesterification at high temperature
(Savez hemijskih inženjera, Beograd, 2016)
Currently, the catalytic efficiency and reusability of the solid base catalysts cannot meet the demand of industrial biodiesel production under low temperature. The purpose of this study is to define the kinetics of ...
Homogenization of an al-mg alloy and alligatoring failure: influence of the microstructure
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
In this study the influence of the microstructure of Al-5.1Mg-0.7Mn alloy on the propensity towards an alligatoring failure was evaluated. The morphology of the constituent particles appears to be the key factor, with ...
Multi-criteria analysis of synthesis methods for ni-based catalysts
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
Catalysts based on the Ni/Al2O3 system are used in a variety of catalytic processes. Catalysts are commonly synthesized through thermochemical routes (impregnation, precipitation, coprecipitation and others). The authors ...
Influence of material velocity on heat generation during linear welding stage of friction stir welding
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
The heat generated during friction stir welding process depends on plastic deformation of the material and friction between the tool and the material. In this work, heat generation is analysed with respect to the material ...
Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the ...
Impact of the poly(propylene oxide)-b-poly(dimethylsiloxane)-b-poly-(propylene oxide) macrodiols on the surface-related properties of polyurethane copolymers
(Assoc Chemical Engineers Serbia, Belgrade, 2016)
Segmented thermoplastic polyurethane copolymers (PURs) were synthesized using 4,4'-methylenediphenyl diisocyanate and 1,4-butanediol as the hard segment and alpha,omega-dihydroxy-poly(propylene oxide)-b-poly(dimethylsilo ...
Encapsulation of alpha-lipoic acid into chitosan and alginate/gelatin hydrogel microparticles and its in vitro antioxidant activity
(Savez hemijskih inženjera, Beograd, 2016)
Alpha-lipoic acid is an organosulphur compound well-known for its therapeutic potential and antioxidant properties. However, the effective use of alpha-lipoic acid depends on biological plasma half-life and its preserving ...
Investigation of different extraction procedures for the determination of major and trace elements in coal by ICP-AES and ion chromatography
(Srpsko hemijsko društvo, Beograd, 2016)
This paper presents the extraction of major and trace elements from a coal sample, in deionized water, by using three different extraction techniques. Rotary mixing and ultrasonic extraction were examined for different ...
Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium
(Savez hemijskih inženjera, Beograd, 2016)
The aim of this study was comparative analysis of catalysts with 5 and 20 wt.% Ni loading, with and without Pd additive, and it included: determination of reduction degrees, investigation on microstructure by scanning ...
Modeling and Prediction of the end of Life Vehicles Number Distribution in Serbia
(Budapest Tech, Budapest, 2016)
The impact of various time-defendant factors on the recycling rate of end-of-life vehicles (ELV) in Republic of Serbia was investigated. Statistical distribution of the frequency of the number of ELV in the year of dismantling ...