Претраживање
Приказ резултата 1-10 од 31
Mechanical activation of talc in high-energy speed rotary mechanoactivator
(Elsevier LtdTechna Group S.r.l., 2012)
This paper presents the results of research on mechanical activation of raw talc in a high-energy speed rotary mechanoactivator. The results of research on effect of mechanically activated talc on the degree of recovery ...
Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method
(Elsevier Sci Ltd, Oxford, 2011)
High temperature hydrothermal syntheses, using calcium nitrate tetrahydrate, sodium dihydrogen phosphate and urea as precursors, and characterization of hydroxyapatite (HAp) whiskers are reported herein. The morphology and ...
Sensitivity analysis of mathematical models for final product properties: Link to DTG curve
(Elsevier Sci Ltd, Oxford, 2013)
Compressive strength and water absorption of fired heavy clay products varies with firing temperatures, but not entirely according to linear function, as it is mostly reported in literature. Also, differential thermo-gravimetric ...
Optimization of the production process through response surface method: Bricks made of loess
(Elsevier, 2013)
Loess clays are commonly used to produce bricks. Heavy clays, taken at location near Zrenjanin, Serbia, are used as a representative raw material in this study. The sample, containing about 28% of clay sized particles, is ...
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...
Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors
(Elsevier Sci Ltd, Oxford, 2008)
The morphology of perovskite LaNiO3 (LNO) thin films is a very important feature considering the fact that they could be used as an electrode material in ferroelectric devices. In this work, LNO films were prepared from ...
Synthesis and characterization of Cr3+ doped TiO2 nanometric powders
(Elsevier, 2016)
Simple route was used for synthesis of nanostructured titania samples doped with 3 and 6 mol% of Cr3+ Titanium(IV)-isopropoxide and water were used as starting materials and as an agents for controlling hydrolysis and ...
Behavior of silicon carbide/cordierite composite material after cyclic thermal shock
(Elsevier Sci Ltd, Oxford, 2009)
In the present work Mg-exchanged zeolite and silicon carbide were used as starting materials for obtaining cordierite/SiC composite ceramics with weight ratio 30:70. Samples were exposed to the water quench test from 950 ...
Thermal shock damage characterization of refractory composites
(Elsevier Sci Ltd, Oxford, 2008)
The possibility of using dolomite and bauxite for synthesis of high temperature castable was studied. Behavior of the material in conditions of rapid temperature changes was investigated. Water quench test was applied to ...
Processing of dense nanostructured HAP ceramics by sintering and hot pressing
(Elsevier Sci Ltd, Oxford, 2009)
A nanosized HAP powder was sintered and hot pressed, in order to obtain dense HAP ceramics. In a first series of experiments, the powder was isostatically pressed into uniform green compacts and sintered at temperatures ...