Претраживање
Приказ резултата 1-10 од 13
Titanium coated with high-performance nanocrystalline ruthenium oxide synthesized by the microwave-assisted sol-gel procedure
(Springer, New York, 2016)
Ruthenium oxide coating on titanium was prepared by the sol-gel procedure from well-defined colloidal oxide dispersions synthesized by the microwave (MW)-assisted hydrothermal route under defined temperature and pressure ...
Enhancement of the electrochemical reduction of oxygen at platinum by nickel underpotential deposition
(Springer, New York, 2006)
Polycrystalline Pt electrode was modified by underpotential deposition (upd) of nickel. The modification was performed by potential cycling in phosphate buffer pH 7. 0 containing NiSO4, in which hydrogen and nickel upd ...
Oxidation of carbon monoxide and formic acid on bulk and nanosized Pt-Co alloys
(Springer, New York, 2012)
Bulk Pt3Co and nanosized Pt3Co and PtCo alloys supported on high area carbon were investigated as the electrocatalysts for the COads and HCOOH oxidation. Pt3Co alloy with Co electrochemically leached from the surface (Pt ...
Electrochemical deposition and corrosion stability of Zn-Co alloys
(Springer, New York, 2009)
Electrochemically deposited Zn-Co alloys under various deposition conditions were investigated using anodic linear sweep voltammetry for phase structure determination, scanning electron microscopy for surface morphology ...
Microwave-assisted polyol synthesis of carbon-supported platinum-based bimetallic catalysts for ethanol oxidation
(Springer, New York, 2012)
High surface area carbon-supported Pt, PtRh, and PtSn catalysts were synthesized by microwave-assisted polyol procedure and tested for ethanol oxidation in perchloric acid. The catalysts were characterized by thermogravimetric ...
Electrodeposition of Zn-Mn alloys at high current densities from chloride electrolyte
(Springer, New York, 2013)
The Zn-Mn alloy electrodeposition on a steel electrode in chloride electrolyte was investigated with the aim of obtaining deposits with as high as possible Mn percent. It was found that the deposition current density and ...
Seawater zinc/polypyrrole-air cell possessing multifunctional charge-discharge characteristics
(Springer, New York, 2017)
An environmentally friendly cell using polypyrrole-air regenerative cathode and zinc as anode is investigated in the 3% sodium chloride solution. The cell can operate in different charge and discharge mode. Polypyrrole can ...
Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition
(Springer, New York, 2010)
Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a ...
Protective ability and impedance response of sol-gel reversely transformed ceria conversion coating on aluminium
(Springer, New York, 2016)
Ceria coating is formed on Al from the ceria sol prepared exclusively by forced hydrolysis of Ce(NO3)(4), in order to test their ability to protect Al from corrosion. The characterization of sol-gel-processed ceria coating ...
Pt/C nanocatalysts for methanol electrooxidation prepared by water-in-oil microemulsion method
(Springer, New York, 2016)
Pt nanoparticles supported on Vulcan XC-72R were synthesized by water-in-oil microemulsion method. By incorporating different amounts of HCl as a capping agent in the precursor-containing water phase, nanoparticle shape ...