Претраживање
Приказ резултата 21-30 од 31
Conventional and spark-plasma sintering of cordierite powders synthesized by sol-gel methods
(Elsevier Sci Ltd, Oxford, 2013)
Cordierite powders synthesized by colloidal and alkoxide sol-gel methods were conventionally and spark-plasma sintered. The powders for the sintering investigations were obtained by calcination of the gels at a temperature ...
Crystallization and sinterability of glass-ceramics in the system La2O3-SrO-B2O3
(Elsevier Sci Ltd, Oxford, 2014)
Glasses with a constant B2O3 and an increasing La2O3 content in the system La2O3-SrO-B2O3 were obtained by the usual melt quenching procedure. The crystallization and sinterability of the glasses were investigated by hot ...
Preparation and characterization of poly(vinyl butyral) electrospun nanocomposite fibers reinforced with ultrasonically functionalized sepiolite
(Elsevier Sci Ltd, Oxford, 2014)
This study presents an investigation of the effects of the processing conditions on the uniformity, morphology and structure of patterned nanofibrous mats of electrospun poly(vinyl butyral)/sepiolite (PVB/Sep) nanocomposite ...
Polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics fabricated by Spark Plasma Sintering: Densification and microstructure development
(Elsevier Sci Ltd, Oxford, 2014)
Using Spark Plasma Sintering it is possible to produce polycrystalline ceramics of very fine microstructure and good mechanical properties. This work presents the fabrication of such ceramics using Eu3+-doped (Y0.7Gd0.3)(2)O-3 ...
Mechanical activation of talc in high-energy speed rotary mechanoactivator
(Elsevier LtdTechna Group S.r.l., 2012)
This paper presents the results of research on mechanical activation of raw talc in a high-energy speed rotary mechanoactivator. The results of research on effect of mechanically activated talc on the degree of recovery ...
Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method
(Elsevier Sci Ltd, Oxford, 2011)
High temperature hydrothermal syntheses, using calcium nitrate tetrahydrate, sodium dihydrogen phosphate and urea as precursors, and characterization of hydroxyapatite (HAp) whiskers are reported herein. The morphology and ...
Optimization of the production process through response surface method: Bricks made of loess
(Elsevier, 2013)
Loess clays are commonly used to produce bricks. Heavy clays, taken at location near Zrenjanin, Serbia, are used as a representative raw material in this study. The sample, containing about 28% of clay sized particles, is ...
Sensitivity analysis of mathematical models for final product properties: Link to DTG curve
(Elsevier Sci Ltd, Oxford, 2013)
Compressive strength and water absorption of fired heavy clay products varies with firing temperatures, but not entirely according to linear function, as it is mostly reported in literature. Also, differential thermo-gravimetric ...
Synthesis and characterization of Cr3+ doped TiO2 nanometric powders
(Elsevier, 2016)
Simple route was used for synthesis of nanostructured titania samples doped with 3 and 6 mol% of Cr3+ Titanium(IV)-isopropoxide and water were used as starting materials and as an agents for controlling hydrolysis and ...
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...