Претраживање
Приказ резултата 1-10 од 22
The use of nanoclay in preparation of epoxy anticorrosive coatings
(Elsevier Science Sa, Lausanne, 2014)
Epoxy/clay nanocomposites (NC) have become a very interesting topic among researchers in the past two decades because nanoclays have a positive effect on the mechanical, thermal and especially barrier and anticorrosive ...
Improvement of the epoxy coating properties by incorporation of polyaniline surface treated TiO2 nanoparticles previously modified with vitamin B6
(Elsevier Science Sa, Lausanne, 2016)
Novel TiO2-PANI core-shell nanocomposite, prepared by in situ oxidative polymerization of aniline in the presence of TiO2 nanoparticles surface modified with vitamin B6, was used to reinforce epoxy resin. The size of ...
Graphene-based antibacterial composite coatings electrodeposited on titanium for biomedical applications
(Elsevier Science Sa, Lausanne, 2015)
The graphene based silver/hydroxyapatite/graphene (Ag/HAP/Gr) composite coatings were produced by electrophoretic deposition (EPD) on titanium to assemble porous bioactive homogenous coatings, with improved corrosion ...
The protective properties of epoxy coating electrodeposited on Zn-Mn alloy substrate
(Elsevier Science Sa, Lausanne, 2015)
The epoxy coating was cataphoretically deposited on steel and steel modified by electroplated Zn-Mn alloy of different chemical contents. The samples were immersed in 0.5 mol dm(-3) NaCl solution for 60 days. The electrochemical ...
Corrosion stability of polyester coatings on steel pretreated with different iron-phosphate coatings
(Elsevier Science Sa, Lausanne, 2011)
The influence of steel surface pretreatment with different types of iron-phosphate coatings on the corrosion stability and adhesion characteristics of polyester coatings on steel was investigated. The phosphate coating was ...
Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution
(Elsevier Science Sa, Lausanne, 2006)
Kinetics of the mild steel corrosion protection in 0.1 mol dm(-3) H2SO4 by polypyrrole coatings have been investigated by the means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, polarization measurements ...
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
The influence of aluminium surface pretreatment on the corrosion stability and adhesion of powder polyester coating
(Elsevier Science Sa, Lausanne, 2010)
One of the most important factors in corrosion prevention by protective coatings is the coating adhesion loss under environmental influence. Thus, adhesion strength is often used when characterizing protective properties ...
Corrosion studies on electrochemically deposited PANI and PANI/epoxy coatings on mild steel in acid sulfate solution
(Elsevier Science Sa, Lausanne, 2005)
The corrosion behavior of mild steel and mild steel covered by electrochemically deposited (a) polyaniline (PANI) film, (b) epoxy coating
and (c) PANI/epoxy coating system in 0.1 M sulfuric acid solution were investigated ...
Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution
(Elsevier Science Sa, Lausanne, 2006)
The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% ...