Претраживање
Приказ резултата 21-30 од 66
Obtaining Polysaccharide-Based Fabrics with Improved Moisture Sorption and Dye Adsorption Properties
(MDPI, 2023)
Raw jute fabric was treated with 0.5, 1.0, or 2.0% chitosan solution to improve its sorption
properties (evaluated through the moisture sorption and adsorption of textile dye Reactive Orange 16 (RO 16)), which are essential ...
Cellulose-Based Waste in a Close Loop as an Adsorbent for Removing Dyes from Textile Industry Wastewater
(MDPI, 2024)
In an attempt to reuse fibrous textile waste and, at the same time, to address dye pollution
in textile wastewater, waste cotton-based yarn was utilized as a cheap and sustainable adsorbent, as
well as a row material for ...
The Influence of Sm Content on the Surface Morphology and Corrosion Behavior of Zn-Co-Sm Composite Coatings
(MDPI, 2023)
The influence of samarium, as an additional alloying element, on the morphology and corrosion performance of the Zn-Co-Sm alloy electrodeposited coatings, was investigated by scanning electron microscopy coupled with energy ...
Spent Coffee Grounds, Plant Growth Promoting Bacteria, and Medicinal Plant Waste: The Biofertilizing Effect of High-Value Compost
(MDPI, 2024)
Composting of mixed medicinal plant waste was performed with the addition of mixture of plant growth promoting bacteria (PGPB), including Streptomyces sp., Paenybacillus sp., Bacillus sp., and Hymenobacter sp., and portions ...
Plasma Treatment as a Sustainable Method for Enhancing the Wettability of Jute Fabrics
(MDPI, 2023)
In this paper, raw jute fabric was subjected to atmospheric pressure dielectric barrier discharge (at 150 or 300 Hz) to enhance its wettability, i.e., capillarity and wetting time. Attenuated Total Reflectance-Fourier ...
Oxidized jute as a valuable adsorbent for Congo Red from an aqueous solution
(SAGE Publications Ltd., 2022)
The raw jute fabric was oxidized with 0.2% or 0.4% NaIO4 for 60 or 120 min to obtain valuable adsorbents for the textile dye Congo Red (CR). Batch adsorption experiments were carried out as a function of solution pH, contact ...
Preparation and Characterization of Geopolymers Based on Metakaolin with the Addition of Organic Phase PVA
(MDPI, 2023)
Geopolymers have excellent physical and mechanical properties, so they can be used as a substitute for ordinary polymers. Geopolymers are ceramic materials, which exhibit the property of brittleness, which can be a limitation ...
Indium Recovery from Jarosite Pb–Ag Tailings Waste (Part 1)
(MDPI, 2023)
The processing of zinc ore using hydrometallurgical methods leads to the formation and accumulation of a by-product called jarosite, which contains concentrated precious metals. In this study, we propose the recovery of ...
One-Pot Syntheses of PET-Based Plasticizer and Tetramethyl Thiuram Monosulfide (TMTS) as Vulcanization Accelerator for Rubber Production
(MDPI, 2023)
Styrene-butadiene (SBR) and acrylonitrile-butadiene (NBR) rubber blends with tetramethyl thiuram disulfide (TMTD) and tetramethyl thiuram monosulfide (TMTS) accelerators and environmentally friendly plasticizers, obtained ...
Mineralogical Characterization of the Grot Lead and Zinc Mine Tailings from Aspects of Their Further Use as Raw Material
(MDPI, 2024)
The possibility of using waste tailings produced by flotation in the lead and zinc mine of Grot, Serbia as a potential source of secondary mineral raw materials was examined. The aim of the research was primarily to carry ...