Претраживање
Приказ резултата 41-50 од 134
Self-healing capability of novel eco-epoxy adhesives based on the modified tannic acid on Al adherends tested in a single lap joint
(Elsevier Ltd., 2022)
The aim of this paper is to study the self-healing capability of fractured Al joints bonded with novel eco-epoxide adhesives synthesized from a bio-renewable raw material (tannic acid – TA). Two synthesized eco-epoxy ...
α-Tricalcium phosphate/fluorapatite-based cement – Promising dental root canal filling material
(University of Novi Sad, Faculty of Technology, 2022)
α-Tricalcium phosphate/fluorapatite (α-TCP/FAp) mixed powders were prepared in order to obtain dental root canal filling cements. Different liquids for cement pastes have been investigated and the most suitable one for ...
Integration of soil washing and cork permeable reactive barriers for the remediation of soil contaminated with polycyclic aromatic hydrocarbons
(John Wiley and Sons Ltd, 2022)
Soil washing is a well-known technology for the remediation of soils polluted by organic contaminants, including polycyclic aromatic hydrocarbons (PAHs). This study aimed to go further by integrating soil washing and ...
Calcite Surfaces Modified with Carboxylic Acids (C 2 to C 18 ): Layer Organization, Wettability, Stability, and Molecular Structural Properties
(American Chemical Society (ACS), 2023)
A fundamental understanding of the interactions between mineral surfaces and amphiphilic surface modification agents is needed for better control over the production and uses of mineral fillers. Here, we controlled the ...
Analysis of the Mechanism of Acid Mine Drainage Neutralization Using Fly Ash as an Alternative Material: A Case Study of the Extremely Acidic Lake Robule in Eastern Serbia
(MDPI, 2022)
Acid mine drainage (AMD) is a waste from mining sites, usually acidic, with high concentrations of sulfates and heavy metal ions. This study investigates the AMD neutralization process using fly ash (FA) as an alternative ...
Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid
(John Wiley and Sons Inc., 2023)
Liposome-encapsulated folic acid is incorporated into the films made from sodium carboxymethyl cellulose (CMC) (2 mas%) and a mixture of CMC and solagum (9:1 w/w) using the film-forming cast solution method. Histidine is ...
Obtaining Polysaccharide-Based Fabrics with Improved Moisture Sorption and Dye Adsorption Properties
(MDPI, 2023)
Raw jute fabric was treated with 0.5, 1.0, or 2.0% chitosan solution to improve its sorption
properties (evaluated through the moisture sorption and adsorption of textile dye Reactive Orange 16 (RO 16)), which are essential ...
Cellulose-Based Waste in a Close Loop as an Adsorbent for Removing Dyes from Textile Industry Wastewater
(MDPI, 2024)
In an attempt to reuse fibrous textile waste and, at the same time, to address dye pollution
in textile wastewater, waste cotton-based yarn was utilized as a cheap and sustainable adsorbent, as
well as a row material for ...
The Influence of Sm Content on the Surface Morphology and Corrosion Behavior of Zn-Co-Sm Composite Coatings
(MDPI, 2023)
The influence of samarium, as an additional alloying element, on the morphology and corrosion performance of the Zn-Co-Sm alloy electrodeposited coatings, was investigated by scanning electron microscopy coupled with energy ...
Spent Coffee Grounds, Plant Growth Promoting Bacteria, and Medicinal Plant Waste: The Biofertilizing Effect of High-Value Compost
(MDPI, 2024)
Composting of mixed medicinal plant waste was performed with the addition of mixture of plant growth promoting bacteria (PGPB), including Streptomyces sp., Paenybacillus sp., Bacillus sp., and Hymenobacter sp., and portions ...