Претраживање
Приказ резултата 1-10 од 417
The current efficiency during the cathodic period of reversing current in copper powder deposition and the overall current efficiency / Iskorišćenje struje za vreme katodnog perioda reversne struje pri taloženju bakarnog praha i ukupno iskorišćenje struje
(Serbian Chemical Society, 2003)
The current efficiency during the cathodic period of reversing current in copper powder deposition was determined by measuring the quantity of hydrogen evolved. The diagrams from which the instantaneous and average current ...
The critical apparent density for the free flow of copper powder / Kritična nasipna masa za tečenje praha bakra
(Serbian Chemical Society, 2003)
A method for the determination of the critical apparent density, which permits the free flow of electrodeposited copper powder is discussed. It was found that powders the apparent density of which were larger than 2.3 g/cm3 ...
Ethylene oxide removal by sorption on aluminium oxide / Uklanjanje etilen oksida sorpcijom na aluminijum oksidu
(Association of Chemical Engineers of Serbia, 2009)
The dynamics of ethylene oxide sorption and desorption on Al2O3 sorbent were investigated. The investigations of ethylene oxide sorption on Al2O3 show that significant sorption appeared above 125°C. The removal of sorbed ...
Complex estimation of woven fabrics bending ability
(Niscair, 2007)
The bending ability of cotton, wool and viscose woven fabrics under the action of their own weight has been examined using the direct indicators by cantilever method, and indirect indicators by disc method. The results ...
Study of chlorination of nickel silicate by gaseous chlorine and calcium chloride in the presence of active additives
(Wiley, Hoboken, 2000)
The paper presents a thermodynamic analysis and experimental research on the kinetics of the chlorination of nickel silicate (2NiO x SiO2) by gaseous chlorine and calcium chloride without additives and in the presence of ...
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
The morphology of cavitation damage of heat-treated medium carbon steel / Morfologija kavitacionog oštećenja srednje-ugljeničnog čelika u poboljšanom stanju
(Serbian Chemical Society, Belgrade, 2006)
In this paper the morphology of the cavitation damage to heat-treated medium carbon steel was analyzed. The experiments were conducted using a modified vibratory cavitation test set up. The erosion rates were measured by ...
Dynamical mechanical analysis of photocrosslinked hyperbranched urethane acrylates
(Srpsko hemijsko društvo, Beograd, 2004)
A series of acrylate functionalized samples based on hyperbranched hydroxy-terminated polyesters with different molecular weights and different degrees of acrylation were synthesized. The obtained urethane acrylates were ...
Comparative potentiodynamic study of nickel and hydrogen underpotential deposition at polycrystalline platinum electrode in weak acid and neutral solutions
(6th Conference of the Yugoslav Materials Research Society, YUCOMAT VI: Current Research in Advanced Materials and Processes, 2005)
Underpotential deposition of nickel and hydrogen on polycrystalline platinum in weak acid and neutral solutions (3.5 lt = pH lt = 7.0), with and without Ni2+-ions, has been examined using cyclic voltammetric technique ...
Properties of dispersion-hardened copper made by internal oxidation of prealloyed copper powder containing 2.5wt. % Al
(Trans Tech Publications Ltd, Durnten-Zurich, 2005)
Prealloyed copper powder containing 2.5wt. %Al was processed in a planetary ball mill to evaluate matrix hardening due to formation of Al2O3 particles in situ by internal oxidation. After milling, the powders were heat ...