Претраживање
Приказ резултата 411-419 од 419
An intensity based optical fiber sensor for low velocity impact detection in unidirectional composites
(Taylor & Francis Ltd, Abingdon, 2000)
Prevention df serious damage of composite structures might be achieved by inspecting the structural integrity during exploitation. This paper decribes the design and development of a promising optical fiber sensor system ...
Reflection and structural characteristics of semi-bright and mirror bright nickel coatings
(Journal of the Serbian Chemical Society, 2002)
The reflection and structural characteristics of the nickel coatings obtained in the presence of a basic brightening addition agent only, and of both a basic and top brightening, addition agent arc examined. It is shown ...
The current distribution in an electrochemical cell. Part VII. Concuding remarks
(Serbian Chemical Society, 2002)
A new method for the determination of the ability of an electrolyte to distrubute uniformly current density in an electrochemical cell is proposed. It is based on the comparison of the current in cells in which the electrode ...
Reactivity of cyclohex-1-enylcarboxylic and 2-methylcyclohex-1-enylcarboxylic acids with diazodiphenylmethane in aprotic solvents / Reaktivnost cikloheks-1-enilkarbonske i 2-metilcikloheks-1-enilkarbonske kiseline sa diazodifenilmetanom u aprotičnim rastvaračima
(Serbian Chemical Society, Belgrade, 2000)
Rate constants for the reaction of diazodiphenylmethane with cyclohex-1-enylcarboxylic acid and 2-methylcyclohex-1-enylcarboxylic acid were determined in nine aprotic solvents, as well as in seven protic solvents, at 30 ...
The influence of electroless plated chromium on printing properties of aluminum offset printing plate
(Journal of the Serbian Chemical Society, 2002)
A method for the improvement of the printing properties of offset printing forms is presented. Specimens of technical aluminum were electrochemically roughened and treated in different alkaline solutions of chromium chloride ...
The sorption and crystallographic characteristics of alumina activated in a reactor for pneumatic transport / Sorpcione i kristalografske karakteristike alumine dobijene u reaktoru za pneumatski transport čestica
(Serbian Chemical Society, 2006)
Active transition alumina powders were obtained by flash calcination of gibbsite in a reactor for pneumatic transport in the dilute, two-phase flow regime in the temperature interval from 883 to 943 K with a residence time ...
Influence of Cu on the mechanical properties of an Al-4.4wt%Mg alloy after ECAP
(Trans Tech Publications, Ltd., 2006)
Two Aluminium alloys, type AA5182 and AA5182+1.2wt% Cu, have been studied. The
second alloy in solution treated condition is 18% stronger than the first one. During ageing at 150°C or 200°C it shows a characteristic fast ...
Some observations on the shear fracture mode in AlMg6.5 alloy sheet
(Frankfurt : Werkstoff-Informationsgesellschaft mbH, 2001)
AlMg6.5 alloy sheet samples with different width to thickness ratio (w/t=2.5-8.3) were tested in uniaxial tension test. SEM observations revealed transgranular ductile dimple type of failure occured by shear process. It ...
Investigation of antimicrobial activity of encapsulated essential oils
(8th Conference of the Yugoslav Materials Research Society, 2007)
Antimicrobial activity of essential oils obtained from many plants has been known for a long time. However, the use of essential oils as active components of biomedical textile have recently gained popularity and aroused ...