Search
Now showing items 71-80 of 80
Effect of welded joint imperfection on the integrity of pipe elbows subjected to internal pressure
(University of Osijek, Tech Fac, Slavonski Brod, 2013)
Since local defects reduce the load-carrying capacity and deformation ability of a piping system, an analysis is undertaken to quantify the influence of weld defects on integrity of the pipe elbows subjected to internal ...
Mechanical and microstructural properties of the fly-ash-based geopolymer paste and mortar
(Institute of Metals and Technology, 2013)
In this paper we have investigated the influence of synthesis parameters on the mechanical properties of the fly-ash-based geopolymer paste and mortars. Moreover, the influence of an addition of limestone sand on the ...
Synthesizing a new type of mullite lining
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2013)
Various possibilities for developing new mullite-based refractory linings that can be applied in a casting process were investigated and are presented in this paper. An optimization of the refractory-lining composition ...
Tailoring the supercapacitive performances of noble metal oxides, porous carbons and their composites / Rasvetljavanje superkondenzatorskih odlika oksida plemenitih metala, poroznih ugljeničnih materijala i njihovih kompozita
(Serbian Chemical Society, 2013)
Porous electrochemical supercapacitive materials, as an important type of new-generation energy storage devices, require detailed analysis and knowledge of their capacitive performances under different charging/discharging ...
Influence of Alkali Cation on the Mechanical Properties and Durability of Fly Ash Based Geopolymers
(Slovenian Chemical Society, 2013)
This research has provided information about the influence of alkali cations (Na+ and K+) on the mechanical properties and durability of fly ash based geopolymers. The results have shown that alkali cations have a strong ...
Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate) / Mehanička svojstva kompozita na bazi nezasićenih poliestarskih smola dobijenih hemijskom reciklažom poli(etilen-tereftalata)
(Association of Chemical Engineers of Serbia, 2013)
Composites based on unsaturated polyester (UPe) resins and fumed silica AEROSIL® RY 50, NY 50, RX 50 and NAX 50, as well as graphite, TiO2 or organically modified clay CLOISITE 30B were prepared in order to investigate the ...
Forced degradation study of torasemide: Characterization of its degradation products
(Taylor & Francis Inc, Philadelphia, 2013)
Torasemide was subjected to forced degradation studies. Stress conditions were varied concerning hydrolysis (acid, base, and neutral), oxidation, photolysis, and thermal degradation in order to identify the potential ...
Biodegradation of starch-graft-polystyrene and starch-graft-poly(methacrylic acid) copolymers in model river water / Biodegradacija kalemljenih kopolimera skroba i polistirena i skroba i poli(metakrilne kiseline) u rečnoj vodi
(Serbian Chemical Soc, Belgrade, 2013)
In this paper, a biodegradation study of grafted copolymers of cornstarch and polystyrene (PS) and cornstarch and poly(methacrylic acid) in model river water is described. These copolymers were obtained in the presence of ...
Arsenic Removal from Water Using Industrial By-Products
(Hindawi Limited, 2013)
In this study, removal of arsenic ions using two industrial by-products as adsorbents is represented. Removal of As(III) and As(V) from water was carried out with industrial by-products: residual from the groundwater ...
Analysis of mechanical and structural properties of micro alloyed steel welded joints depending on quality of cored wire
(University of Osijek, Tech Fac, Slavonski Brod, 2013)
The aim of this study was to master new quality cored wires made of steel strips and the cores filled with metal powders and low molecular hydrophobic compounds. For experimental research, the specimens were made of micro ...