Претраживање
Приказ резултата 61-70 од 390
Correlation of osmotic coefficient data for ZnSO4(aq) at 25 degrees C by various thermodynamic models
(Kluwer Academic/Plenum Publ, New York, 2003)
The available literature data on the osmotic coefficient of ZnSO4(aq) at 25degreesC in the molality range from 0.1 to 4.3 mol-kg(-1) and new experimental data from 1.2 to 2.9 mol-kg(-1), at the same temperature, are ...
The efficiency of an enzyme treatment in reducing wool shrinkage
(Taylor & Francis Ltd, Abingdon, 1998)
The influence of different experimental conditions, chosen according to a central rotatable plan (Box-Hunter) at three levels of treatment time, on the shrink-resistance properties of wool treated with serine proteinase ...
Immobilization/encapsulation of cells using electrostatic droplet generation - Experiments and theory
(Minerva Biotecnologica, 2000)
The mechanism of alginate droplet formation as well as experimental parameters for producing very small polymer microbeads (i,e, less then 100 microns diameter) using an electrostatic droplet generator were investigated, ...
Method for determining refractory specimen heat resistance
(Springer, New York, 2008)
The most important properties governing the operation of refractories are refractoriness, service temperature and heat resistance. The heat resistance of specimens based on Al2O3 is determined by a standard laboratory ...
Electrophoretic deposition of boehmite coatings on titanium from aqueous sols
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
The electrophoretic deposition from sots and colloidal suspensions of ceramic powders has many advantages over conventional ceramic powder processing methods. In this way it is possible to control the thickness and ...
Fatigue damage detection in composite rods using fiber optic intensity based sensors
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
An application of the embedded intensity based fiber optic sensors (FOS) for fatigue damage detection in cantilevered composite rods is presented. During the fatigue test with constant amplitude of oscillations, the ...
Using the image analysis program for prediction of thermal stability behavior of refractory specimen
(8th International Symposium on Multifunctional and Functionally Graded Materials, FGM2004, 2005)
Most important properties which are usually measured for refractories are work temperature and thermal stability. Thermal stability of the alumina based samples was measured using a standard laboratory procedure, the water ...
Chain conformational statistics and mechanical properties of elastomer composites
(Progress in Advanced Materials and Processes: Proceedings of the Fifth Jugoslav Materials Research Society, YUCOMAT V, 2004)
A new equation of state for elastomer network under constrains due to fillers has been proposed and verified for two most common and industry important rubbers, natural rubber and styrene-butadiene rubber. A series of ...
Nonlinear dynamics of brewing yeast cell growth in alginate micro-beads
(7th Conference of the Yugoslav Materials Research Society - Recent Developments in Advanced Materials and Processes, YUCOMAT VII, 2006)
The nonlinear dynamics of brewing yeast cell growth in porous Ca-alginate matrices is considered experimentally and theoretically. The applications of alginate matrices include the reduction of internal mass transfer ...
Combustion of Metallurgical Wastes Using Secondary Aluminum Foils
(Taylor & Francis Inc, Philadelphia, 2017)
Simulating the reactions in a complex system can lead to self-sustaining and energy efficient treatment of wastes in recycling promoting manner. In this contribution, the synergic combination of electric arc furnace dust ...