Search
Now showing items 71-80 of 80
Biomedical fibrous materials PP/viscose with programmed properties as transdermal systems / Biomedicinski vlaknasti materijali polipropilen/viskoza programiranih svojstava kao transdermalni sistem
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2013)
The subject of this paper is the behaviour of the biomedical fibrous materials in the form of transdermal sistem for wound dressing, consisting of a nonwoven textile base which contains polypropylene (PP) / viscose, a ...
Hemp (Cannabis sativa) fibers as biosorbents and precursor for carbon sorbent production / Vlakna konoplje (Cannabis sativa) kao biosorbenti i sirovine za proizvodnju ugljeničnih sorbenata
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2015)
Short and entangled hemp fibers, obtained as a waste from textile industry, were used as efficient biosorbent and low-cost precursor for carbon sorbent production. In order to obtain the biosorbents with better sorption ...
Activated carbon materials derived from hemp fibers in pesticide adsorption and water disinfection / Adsorpcija pesticida i dezinfekcija vode aktiviranim ugljeničnim materijalima na bazi vlakana konoplje
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2015)
By varying the parameters of carbonization and activation, different samples of hemp fibers based activated carbon were obtained. Optimal production conditions were selected based on the adsorption properties of activated ...
Influence of the heat treatment on the tribological characteristics of the Ti-based alloy for biomedical applications
(Univerzitet u Kragujevcu - Fakultet inženjerskih nauka, Kragujevac, 2009)
The influence of diverse heat treatments on micro-structural and tribological characteristics of Ti-6Al-4V ELI (mass%) alloy, which is used as implant material in biomedical engineering, was investigated on a block-on-disc ...
Numerical simulation of the plunge stage in friction stir welding alloys EN AW 2024 T 351 and EN AW 7049A T 652 / Numerička simulacija faze probijanja postupka zavarivanja trenjem mešanjem legura EN AW 2024 T 351 i EN AW 7049A T 652
(Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Institut za proizvodno mašinstvo, Novi Sad, 2011)
This paper investigates the plunge stage using numerical modeling. Change of temperature and plunge force have been analyzed during the plunge stage of the FSW procedure for high hardness aluminum alloys EN AW 2024 T 351 ...
The influence of different supplements on the probiotic character of fermented whey-based beverage / Uticaj različitih dodataka na probiotski karakter fermentisanog napitka na bazi surutke
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2013)
The aim of this study was the selection of appropriate supplements for the probiotic whey-based beverage production by Lactobacillus johnsonii NRRL B-2178. The analysis of the main effects and their interactions was performed ...
Obtaining of medical textiles based on viscose and chitosan with simultaneously improved sorption and antibacterial properties by using dielectric barrier discharge
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2021)
This study aimed to obtain textile based on viscose and chitosan with simultaneously improved sorption and antibacterial properties. For that reason, before functionalization with chitosan, the viscose fabric was modified ...
Mathematical modeling of zinc ions biosorption by short hemp fibers / Matematičko modelovanje procesa biosorpcije jona cinka kratkim vlaknima konoplje
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2013)
Waste hemp fibers were used as an efficient biosorbent for removal of zinc ions from polluted water. In order to obtain the material with better sorption properties, short hemp fibers were chemically modified. The following ...
Geospatial mapping of health risk from trace metal(loid)s in the soil at an abandoned painting factory
(University of Niš, Faculty of Sciences and Mathematics, 2020)
A survey was made to analyze the geostatistical (GIS) distribution of the health risk of toxic
trace metal(loid)s in the industrial soil located in the facility of an abandoned paints manufacturing company. A total of ...
Thermal comfort behavior of hemp based knitted fabrics / Ponašanje pletenina na bazi konoplje u pogledu toplotnog komfora
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2011)
The hemp fibres production is characterized by sharp ups and downs, from the extensively growing to their decline in the past decades. Thanks to the unique hemp fibre properties, such as physiological, hygienic and ecological ...