Search
Now showing items 11-20 of 23
Influence of the thermo-mechanical treatment on the exfoliation and pitting corrosion of an aa5083-type alloy
(Institute of Metals and Technology, 2014)
Exfoliation and pitting corrosion were tested on an AA5083-type alloy sheet, after applying different thermo-mechanical treatments. Hot-rolled plates were laboratory cold rolled with 16-54 % reductions, and subsequently ...
Homogenization of an al-mg alloy and alligatoring failure: influence of the microstructure
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
In this study the influence of the microstructure of Al-5.1Mg-0.7Mn alloy on the propensity towards an alligatoring failure was evaluated. The morphology of the constituent particles appears to be the key factor, with ...
Multi-criteria analysis of synthesis methods for ni-based catalysts
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
Catalysts based on the Ni/Al2O3 system are used in a variety of catalytic processes. Catalysts are commonly synthesized through thermochemical routes (impregnation, precipitation, coprecipitation and others). The authors ...
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
Characterisation of biomedical titanium layers deposited by a vacuum plasma spray process
(Materiali in Tehnologije, 2021)
In this paper we will describe the process of the deposition of thick layers of VPS-Ti coating, which is used as a bonding layer for the upper porous Ti coatings on implant substrates. In order to deposit the powder, we ...
Mechanical and microstructural properties of the fly-ash-based geopolymer paste and mortar
(Institute of Metals and Technology, 2013)
In this paper we have investigated the influence of synthesis parameters on the mechanical properties of the fly-ash-based geopolymer paste and mortars. Moreover, the influence of an addition of limestone sand on the ...
Nanofoils for soldering and brazing in dental joining practice and jewellery manufacturing
(Institute of Metals and Technology, 2010)
This paper describes the development of novel, reactive Al-Au nano-multilayered foils, their possible application in different fields and a discussion of the nano-foils' suitability for dental and jewellery applications. ...
Optimization of the recycling processes for magnesium from a highly contaminated waste
(Institute of Metals and Technology, 2014)
With the recently increased use of magnesium alloys, especially in the automotive industry, a large quantity of generated waste, based on magnesium alloys, is expected. Such a waste often contains many impurities such as ...
CFD analysis of exothermic reactions in al-au nano multi-layered foils
(Institute of Metals and Technology, 2011)
This work presents the possibility of numerical modelling using Computational Fluid Dynamics (CFD) in the field of nano-foils. The governing equations were solved using a Finite Volume Methodology (FVM). The computational ...
Mechanical and structural characteristics of atmospheric plasma-sprayed multifunctional tio2 coatings
(Materiali in Tehnologije, 2020)
Titanium dioxide (TiO2) is a multifunctional oxide that is an interesting material for many technological applications. This paper presents the mechanical properties and microstructure of TiO2 coatings resistant to dry ...