Pretraživanje
Prikaz rezultata 21-23 od 23
Influence of cold-rolling deformation and annealing temperature on the grain growth of al-4%mg-mn alloy
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2020)
The propensity of an alloy toward an abnormal grain growth (AGG) severely limits the annealing temperature range, capability for hot forming, and deteriorates mechanical properties. In this work, the results of a study of ...
Influence of the thermo-mechanical treatment on the exfoliation and pitting corrosion of an aa5083-type alloy
(Institute of Metals and Technology, 2014)
Exfoliation and pitting corrosion were tested on an AA5083-type alloy sheet, after applying different thermo-mechanical treatments. Hot-rolled plates were laboratory cold rolled with 16-54 % reductions, and subsequently ...
Homogenization of an al-mg alloy and alligatoring failure: influence of the microstructure
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
In this study the influence of the microstructure of Al-5.1Mg-0.7Mn alloy on the propensity towards an alligatoring failure was evaluated. The morphology of the constituent particles appears to be the key factor, with ...