Search
Now showing items 21-30 of 40
Influence of substrate on the formation and growth kinetics of cathodic electrocoat paint
(Elsevier Science Sa, Lausanne, 1995)
Cataphoretic deposition of an epoxy primer was carried out on four different substrates: bare steel; phosphated steel; bare zinc-plated steel; and phosphated zinc-plated steel. Film growth was followed by observing the ...
The effect of resin concentration and electrodeposition bath temperature on the corrosion behaviour of polymer-coated steel
(Progress in Organic Coatings, 1990)
A.C. impedance measurements carried out on epoxy-resin electrocoated steels have been used to determine the pore resistance, capacitance and relative permittivity of the organic films. The time dependence of these ...
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
The influence of aluminium surface pretreatment on the corrosion stability and adhesion of powder polyester coating
(Elsevier Science Sa, Lausanne, 2010)
One of the most important factors in corrosion prevention by protective coatings is the coating adhesion loss under environmental influence. Thus, adhesion strength is often used when characterizing protective properties ...
Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution
(Elsevier Science Sa, Lausanne, 2006)
Kinetics of the mild steel corrosion protection in 0.1 mol dm(-3) H2SO4 by polypyrrole coatings have been investigated by the means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, polarization measurements ...
Electrochemical polymerization and initial corrosion properties of polyaniline-benzoate film on aluminum
(Elsevier Science Sa, Lausanne, 2009)
Electrochemical synthesis of polyaniline (PANI) on aluminum electrode from aqueous Solution Of 0.25 mol dm(-3) aniline and 0.2 mol dm(-3) sodium benzoate has been investigated under potentiodynamic and galvanostatic ...
Synthesis and characterization of interpenetrating polymer networks with hyperbranched polymers through thermal-UV dual curing
(Elsevier Science Sa, Lausanne, 2008)
The aim of this study was to investigate the possibility of using acrylated hyperbranched polyesters (HBP) as UV curable component in dual curing automotive applications. Dual curing is one of possible ways to obtain fast ...
Adhesion characteristics and corrosion stability of epoxy coatings electrodeposited on phosphated hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2008)
The influence of hot-dip galvanized steel (HDG) surface pretreatment with phosphate coatings on the corrosion stability and adhesion characteristics of epoxy coatings electrodeposited on HDG steel was investigated. Phosphate ...
Corrosion stability of polyester coatings on steel pretreated with different iron-phosphate coatings
(Elsevier Science Sa, Lausanne, 2011)
The influence of steel surface pretreatment with different types of iron-phosphate coatings on the corrosion stability and adhesion characteristics of polyester coatings on steel was investigated. The phosphate coating was ...
Electrochemical synthesis and characterization of polyaniline thin film and polyaniline powder
(Elsevier Science Sa, Lausanne, 2011)
The polyaniline thin film electrode and powder have been synthesized on graphite electrodes from 0.5 M hydrochloric acid solution under galvanostatic conditions. The water insoluble and acetone soluble polyaniline mass ...