Претраживање
Приказ резултата 61-70 од 78
Characterization of vacuum plasma spray VPS - W coating deposited on stainless steel substrates / Karakterizacija vakuum plazma sprej VPS - W prevlake deponovane na čeličnim podloga
(Inženjersko društvo za koroziju, 2021)
In this paper, studied was the melting of W powder particles in plasma, their behavior at oxidation as well as the mechanism of hardening on the surface of the substrate. Tungsten coating layers were deposited with vacuum ...
Geospatial mapping of health risk from trace metal(loid)s in the soil at an abandoned painting factory
(University of Niš, Faculty of Sciences and Mathematics, 2020)
A survey was made to analyze the geostatistical (GIS) distribution of the health risk of toxic
trace metal(loid)s in the industrial soil located in the facility of an abandoned paints manufacturing company. A total of ...
The effect of yarn folding on some comfort properties / Efekat končanja pređa na neka svojstva komfora
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2013)
The compressive nature of textile fabrics is known to be a significant factor influencing tactile comfort. In addition, the transport of the heat through the fabric is considered to be the major factor in thermal comfort. ...
The gelatinization of nitrocellulose by primary stabilizers / Želatinizacija nitroceluloze primarnim stabilizatorima
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2017)
The examination results of the gelatinization of nitrocellulose gunpowders, stabilized by different stabilizers are described in this study. The microstructure of gunpowder samples of different chemical compositions is ...
Some tactile comfort properties of plain knitted fabrics / Neka svojstva taktilnog komfora glatkih pletenina
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2011)
The sensory perception of textile materials is related to mechanical stimuli due to pressure and friction forces, so the softness and surface properties are considered to be the key parameters of fabric hand. The aim of ...
Modern encapsulation processes in food technology / Savremeni procesi inkapsulacije u tehnologiji hrane
(Društvo za ishranu Srbije, Beograd, 2014)
The encapsulation processes have been intensively studied in the recent years as possible alternative to conventional food technologies. Encapsulation of food active compounds is based on formation of protective layer(s) ...
STRUKTURNE KARAKTERISTIKE, KOMPRESIONA I PREKIDNA SVOJSTVA DESNO-LEVIH KULIRANIH PLETENINA PRE I POSLE PRANJA / STRUCTURAL CHARACTERISTICS, COMPRESSION AND STRENGTH PROPERTIES OF PLAIN WEFT KNITTED FABRICS BEFORE AND AFTER WASHING
(Savez inženjera i tehničara tekstilaca Srbije, 2023)
U radu su ispitivane strukturne karakteristike, kompresiona i prekidna svojstva pletenina pre i posle pranja. Ispitivanja su obuhvatila tri desno-leve kulirane pletenine sirovinskog sastava pamuk, vuna i organska vuna. Od ...
CELLULOSE-BASED WASTE STRUCTURE AND CHEMICAL COMPOSITION IMPACT ON THE ADSORPTION OF PHARMACEUTICALS / UTICAJ STRUKTURE I HEMIJSKOG SASTAVA CELULOZNOG OTPADA NA ADSORPCIJU FARMACEUTIKA
(Savez inženjera i tehničara tekstilaca Srbije, 2023)
In an attempt to reuse fibrous textile waste, and at the same time to reduce its quantity, waste hemp and
flax fibers, and cotton yarn were used as cheap and sustainable adsorbents for the removal of pharmaceuticals
from ...
Activated carbon materials derived from hemp fibers in pesticide adsorption and water disinfection / Adsorpcija pesticida i dezinfekcija vode aktiviranim ugljeničnim materijalima na bazi vlakana konoplje
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2015)
By varying the parameters of carbonization and activation, different samples of hemp fibers based activated carbon were obtained. Optimal production conditions were selected based on the adsorption properties of activated ...
Influence of the heat treatment on the tribological characteristics of the Ti-based alloy for biomedical applications
(Univerzitet u Kragujevcu - Fakultet inženjerskih nauka, Kragujevac, 2009)
The influence of diverse heat treatments on micro-structural and tribological characteristics of Ti-6Al-4V ELI (mass%) alloy, which is used as implant material in biomedical engineering, was investigated on a block-on-disc ...