Претраживање
Приказ резултата 11-20 од 27
Formation of Disperse Silver Deposits by the Electrodeposition Processes at High Overpotentials
(Esg, Belgrade, 2012)
In this study, electrodeposition of silver from nitrate solution at the high overpotentials was analyzed. Morphologies of silver deposits obtained at the different overpotentials and with the different electrodeposition ...
Microstructure and corrosion behaviour of Zn-Co alloys deposited from three different plating baths / Mikrostruktura i koroziono ponašanje Zn-Co legura taloženih iz sulfatnog i hloridnih rastvora
(Serbian Chemical Society, Belgrade, 2011)
The effects of plating baths of different composition on the micro- structure and corrosion stability of Zn-Co alloy coatings were studied. Zn-Co alloys with the same Co content were deposited from chloride plating baths ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Srpsko hemijsko društvo, Beograd, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead
(Serbian Chemical Society, 2014)
The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of ...
Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles / Uticaj tipa elektrolita na morfološke i kristalografske karakteristike praškastih čestica olova
(Serbian Chemical Society, 2013)
Lead electrodeposition processes from basic (nitrate) and complex (acetate) electrolytes were mutually compared by scanning electron microscopy and X-ray diffraction investigation of the produced powder particles. The shape ...
Effect of non-stationary current regimes on the morphology of silver electrodeposits / Efekat nestacionarnih strujnih režima na morfologiju taloga srebra
(Serbian Chemical Society, Belgrade, 2009)
This work is concerned with the use of reverse current regimes in order to form small-grained and compact silver deposits during the electrorefining process. Several parameters were varied, i.e., i) anodic overpotential, ...
Determination of the absolute hardness of electrolytically produced copper coatings by application of the Chicot–Lesage composite hardness model / ОДРЕЂИВАЊЕ АПСОЛУТНЕ ТВРДОЋЕ ЕЛЕКТРОЛИТИЧКИ ДОБИЈЕНИХ ПРЕВЛАКА БАКРА ПРИМЕНОМ CHICOT–LESAGE КОМПОЗИТНОГ МОДЕЛА ТВРДОЋЕ
(Serbian Chemical Society, 2022)
In this study, a novel procedure, based on application of the Chicot––Lesage (C–L) composite hardness model, was proposed for the determination of an absolute hardness of electrolytically produced copper coatings. The Cu ...
Randomly oriented twin domains in electrodeposited silver dendrites
(Serbian Chemical Society, 2015)
Silver dendrites were prepared by electrochemical deposition. The structures of the Ag dendrites, the type of twins and their distribution were investigated by scanning electron microscopy (SEM), Z-contrast high angle ...
Manganese electrodeposition from urea-rich electrolyte
(Soc Chemists Technologists Madeconia, Skopje, 2015)
Pure manganese coatings were prepared on the steel (AISI 4340) electrode by a non-conventional electrodeposition method, in the presence of 8 mol dm(-3) of urea as a plating additive. The influence of urea on the ...
The importance of using hydrogen evolution inhibitor during the Zn and Zn-Mn electrodeposition from ethaline
(Srpsko hemijsko društvo, Beograd, 2019)
Cyclic voltammetry was used for the characterization of zinc electro-deposition on steel from ethaline deep eutectic solution (1:2 choline chloride:ethylene glycol). The influence of 4-hydroxy-benzaldehyde (HBA) as an ...