Search
Now showing items 31-40 of 445
Determination of clopidogrel using square wave voltammetry at a gold electrode / Određivanje klopidogrela voltametrijom sa pravouglim impulsima na elektrodi od zlata
(Serbian Chemical Society, Belgrade, 2013)
The determination of clopidogrel, an antiplatelet agent, was performed at a gold electrode in pH 3.7 acetate buffer using cyclic voltammetry (CV) and square wave voltammetry (SWV). Each voltammogram was characterized by ...
Production of lipase from Pseudozyma aphidis and determination of the activity and stability of the crude lipase preparation in polar organic solvents / Proizvodnja lipaze iz Pseudozyma aphidis i utvrđivanje aktivnosti i stabilnosti lipaze u polarnim organskim rastvaračima
(Serbian Chemical Society, Belgrade, 2011)
The production of lipase from Pseudozyma aphidis (DSM 70725) was determined in six different media. The highest lipase production was observed in a medium with glucose as the sole carbon source, and yeast extract and sodium ...
Characterisation of surface oxygen groups on different carbon materials by the Boehm method and temperature-programmed desorption / Karakterizacija površinskih kiseoničnih grupa različitih karbonskih materijala Bemovom (Boehm) metodom i temperaturski programiranom desorpcijom
(Serbian Chemical Society, Belgrade, 2011)
The surface characteristics of different carbon materials: activated carbon, carbon felt, glassy carbon and a porous carbon monolith were investigated. The specific surface area was examined by the BET method with N2 ...
Electrochemical oxidation of methanol on Pt/(RuxSn1-x)O2 nanocatalyst / Elektrohemijska oksidacija metanola na katalizatoru Pt/(RuxSn1-x)O2
(Serbian Chemical Society, Belgrade, 2013)
Ru-doped SnO2 powder, (RuxSn1-x)O2, with a Sn:Ru atomic ratio of 9:1 was synthesized and used as a support for Pt nanoparticles (30 mass % loading). The (RuxSn1-x)O2 support and the Pt/(RuxSn1-x)O2 catalyst were characterized ...
Corrosion of an austenite and ferrite stainless steel weld / Korozija zavarenog spoja austenitnog i feritnog nerđajućeg čelika
(Serbian Chemical Society, Belgrade, 2011)
Dissimilar metal connections are prone to frequent failures. These failures are attributed to the difference in the mechanical properties across the weld, the coefficients of thermal expansion of the two types of steels ...
The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition / Jonska ravnoteža u sistemu CuSO4-H2SO4-H2O i formiranje strukture pčelinjeg saća elektrohemijskim taloženjem bakra
(Serbian Chemical Society, 2008)
The ionic equilibrium of the species in the CuSO4-H2SO4-H2O system was employed to systematize the conditions of copper electrodeposition leading to the formation of the honeycomb-like structure. The reason why CuSO4 ...
The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle / Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha I - modelovanje reprezentativne čestice praha
(Serbian Chemical Society, 2003)
One of the most important properties of copper powder is its flow ability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting ...
Influence of different carbon monolith preparation parameters on pesticide adsorption / Uticaj parametara dobijanja karbon monolita na adsorpciju pesticida
(Serbian Chemical Society, Belgrade, 2013)
The capacity of carbon monolith for pesticide removal from water, and the mechanism of pesticide interaction with the carbon surface were examined. Different carbon monolith samples were obtained by varying the carbonization ...
A solidification/stabilization process for wastewater treatment sludge from a primary copper smelter / Proces solidifikacije/stabilizacije za tretman otpadnih voda mulja iz primarne topionice bakra
(Serbian Chemical Society, Belgrade, 2013)
Wastewater treatment sludge from a primary copper smelter is characterized as hazardous waste that requires treatment prior to disposal due to its significant contents of heavy metals and arsenic. The aim of the presented ...
Removal of textile dyes from water by TiO2 nanoparticles immobilized on poly(epsilon-caprolactone) beads and foams
(Srpsko hemijsko društvo, Beograd, 2018)