Search
Now showing items 11-20 of 174
The influence of Mg and Mn content on abnormal grain growth in AA5182 type alloys
(Savez inženjera metalurgije Srbije, Beograd, 2019)
The occurrence of abnormal grain growth (AGG) in AA5182 alloy during annealing imposes severe restrictions on processing parameters and deteriorates mechanical properties. In this work, we investigated the effect of chemical ...
Defect formation during synthesis and welding of silver nanowires for solar cell applications
(Savez inženjera metalurgije Srbije, Beograd, 2019)
Structural defects such as stacking faults and twins, observed in many face-centered cubic (FCC) structured metals and alloys with low stacking fault energies, in general, play an important role in microstructure evolution, ...
Influence of the structural changes on cavitation resistance of Al18SiCuMg alloy produced by rheocasting process / Uticaj strukturnih promena na kavitacionu otpornost Al18SiCuMg legure proizvedene reokasting procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The influence of stirring speeds of 1000 and 1500 r/min on the microstructure of Al18SiCuMg alloy was investigated. The smaller size of Si particles of rheocast sample obtained by higher cooling rate and higher stirring ...
Leakage of an austenitic steel CO2 storage tank / Curenje posude za skladištenje CO2 od austenitnog čelika
(Society for Structural Integrity and Life, Institute for Material Testing, 2012)
After the occurrence of water droplets on the manhole outer wall of a storage tank for carbon dioxide, by detailed inspection, a net of cracks is detected in the manhole flange, close to the welded joint between the flange ...
Significance and applicability of structural integrity assessment / Značaj i primenljivost ocene integriteta konstrukcija
(Society for Structural Integrity and Life, Institute for Material Testing, 2012)
To avoid unexpected and frequent serious failures of objects and equipment in service, and save their structural integrity, proper experimental and theoretical analyses are required, that are supported by modeling and ...
Assessment of the behaviour of fatigue loaded HSLA steel welded joint by applying fracture mechanics parameters / Procena ponašanja zavarenog spoja HSLA čelika opterećenog na zamor primenom parametara mehanike loma
(Society for Structural Integrity and Life, Institute for Material Testing, 2012)
From a fracture mechanics point of view on welded joints, it is assumed that the welded joint is pre-cracked such as that the fatigue life of the pre-cracked structure is then determined by the period of crack growth under ...
Photocatalytic degradation of carbamate insecticides: Effect of different parameters / Fotokatalitička degradacija karbamatnih insekticida - efekti različitih parametara
(Institute of Pesticides and Environmental Protection, 2019)
Photocatalytic degradation of a model compound of the carbamate insecticide carbofuran in water was studied using polychromatic light and ZnO and TiO2 catalysts. The influence of operational parameters, such as reaction ...
Polymer-Based Smart Coatings for Comfort in Clothing
(University of Ljubljani, Fac Natural Sci & Engineering, Dept Textiles, Ljubljana, 2016)
This paper reviews the application of polymer-based smart coatings for obtaining active comfort regulation in clothing. Currently available systems for adaptive comfort regulation which involve application of phase change ...
Estimation of phosphorus distribution ratio at the end of blowing in bof
(Metallurgical & Materials Engineering, 2021)
In integrated steel plants, the removal of phosphorous normally takes place during the primary basic oxygen furnace (BOF) steelmaking process. Phosphorous is usually introduced to the integrated steelmaking process through ...
Encapsulation of resveratrol in spherical particles of food grade hydrogels / Inkapsulacija resveratrola u sferične čestice na bazi hidrogelova dozvoljenih za upotrebu u hrani
(Institute for Food Technology, Novi Sad, 2017)
The paper reports about the preparation and characterization of hydrogel particles containing liposomes loaded with resveratrol as an active compound. The materials used for preparation of the particles were chosen to be ...